0.60 cu in Parker H25AG2YRE Hydraulic Pump

Item Number: 9-10020

Price: $119.95
TOP
Back to top

0.60 cu in Parker H25AG2YRE Hydraulic Pump

0.60 cu in Parker H25AG2YRE Hydraulic Pump

item number: 9-10020 PRICE: $119.95 4 In Stock Surplus Item


calculate shipping
Calculate Shipping for Item 9-10020
0.60 cu in Parker H25AG2YRE Hydraulic Pump
Item Number: 9-10020
Price: $119.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
Description
0.60 CU IN PARKER H25AG2YRE HYDRAULIC PUMP
Unused old inventory, Parker Model H25AG2YRE hydraulic gear pump with a 4 GPM priority flow divider. Shaft has a limit ring 1-1/2" from end that could be removed if needed.

SPECIFICATIONS
  • Manufacturer Parker
  • Model H25AG2YRE
  • Disp. 0.60 cu. in. / rev.
  • Pump Type Gear
  • Rotation CW
  • Pressure:
       2500 PSI Max.
  • Speed:
       4000 RPM Max.
  • Flow:
       2.52 GPM @ 1000 RPM and 2500 PSI.
  • Mount 2 bolt SAE A
  • Shaft 3/4" dia x 2-1/2" long keyed, limit ring 1-1/2" from end of shaft. 1/2"-20 male threads on end
  • Inlet Port SAE 16
  • Outlet Port SAE 8 priority, SAE 10 excess
  • Size 5" x 5" x 5"
  • Shpg. 9 lb.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 3

What coupling is required?

A: There is enough 3/4" shaft to properly seat a L-095 series three jaw coupling half. The threaded portion of the shaft would likely need to be removed. Otherwise a standard 3/4" coupler such as item 1-1563-C would fit as well.

Can this pump be run with a pulley belt drive?

A: These pumps are not rated for indirect/pulley drive. Doing so will dramatically reduce the lifespan of the pump.

Rotation is listed as Clockwise (CW). IS this viewed from Shaft End or Opposite End?

A: We call out rotation as looking at the shaft.

Recently Viewed
Email a Friend
0.60 cu in Parker H25AG2YRE Hydraulic Pump
Item Number: 9-10020
Price: $119.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

0.60 cu in Parker H25AG2YRE Hydraulic Pump
Additional Comments:

Please wait...
Newsletter SignUp