Not familiar with SAE 10 and 12. What type and size fittings do I need for inlet and outlet.?
A: SAE 10 (7/8"-14 o-ring boss) and SAE 12 (1 1/16"-12 o-ring boss) are common straight threaded fittings used in the hydraulic industry for decades. We have a wide selection of adapters to NPT or JIC if those are more familiar and compatible with your system.
Date Submitted: 08/13/2018
is pump Salami pump #2PB19D-R85S2 does this pump turn clockwise facing the shaft? I need a pump that turns clockwise facing the tractor shaft Will this work for me?
A: This pump turns clockwise as facing the pump shaft. If the shaft you wish to drive from turns clockwise as facing it, this pump will not work. A counter clockwise rotation pump would be required if mounting shaft-to-shaft direct.
Date Submitted: 01/30/2018
Can this pump be converted to ccw rotation without changing parts?
A: Not to our knowledge, no.
Date Submitted: 09/26/2017
Will. It. Work. With. A. 6.5 gas motor
A: If you only wish to circulate fluid at 450 psi or less it could. If you want any usable pressure, no.
Date Submitted: 08/31/2017
For 1.15 cu in SALAMI 2PB19D-R85S2 HYDRAULIC PUMP what size electric motor should be used.
A: That would depend entirely on the rpm at which the motor turned and the pressure desired for continuous operation. For example, at 1800 rpm and 3000 psi, this pump would require 18-20 electric HP to generate flow at that pressure continuously. Higher speeds would require more, lower speeds and lower pressures would require less.