I have a 25 hp Satoh S650G tractor with a kayaba dowty GP-1 hydraulic pump ,pressure loading type . With output $.1 gl/min at 2800rpm , will this pump work
A: No. The displacement of the original pump calculates out to approximately .34 cubic inch displacement. This pump would be three times larger with an equally increased horsepower demand.
Date Submitted: 02/17/2018
could you use this to transfer waste oil and if so how much hp would it take and how many gpm at say 1700 rpm
A: With the priority divider, it may not be the best choice. At 1700 rpm this pump would produce approximately 8.25-8.5 gpm. With flooded inlet conditions and no restriction on the outlets, it could take between 0.5-1 HP depending on how the system was built.