1.526 cu in Concentric Hydraulic Pump WP09A1B250

Item Number: 9-8981

Price: $79.95
Back to top

1.526 cu in Concentric Hydraulic Pump WP09A1B250

1.526 cu in Concentric Hydraulic Pump WP09A1B250

item number: 9-8981 PRICE: $79.95 90 In Stock Surplus Item

calculate shipping
Calculate Shipping for Item 9-8981
1.526 cu in Concentric Hydraulic Pump WP09A1B250
Item Number: 9-8981
Price: $79.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 45 of our current catalog
New, CONCENTRIC model# WP09A1B250 hydraulic pump. "150-3414" stamped into pump housing. Rear plate has one HYDRAFORCE CV10-23-05 check valve with 3500 PSI rating, 5 PSI bias spring and one HYDRAFORCE TS10-27A proportional pressure relief valve with 12 VDC coil, Deutsch DT04-2P connector (rated for 3000 PSI).

  • Manufacturer Concentric
  • Model WP09A1B250
  • Disp. 1.526 cu. in. / rev.
  • Pump Type Gear
  • Rotation Clockwise
  • Pressure:
       3000 PSI Cont.
  • Speed:
       3000 RPM max.
  • Flow:
  • Mount Two-bolt SAE A
  • Shaft 3/4" dia. x 1-3/4" tapered shaft w/ threaded end and castle nut
  • Inlet Port SAE 16
  • Outlet Port SAE 12
  • Size 6-3/4" x 5-9/16" x 5"
  • Shpg. 15 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 2

What pumps do you have that will work with the electric clutch (see previous question)?

A: Please see items 9-1737, 9-1737-S-8, 9-1737-S-6; and items 9-1738, 9-1738-S-8, 9-1738-S-6 for the available clutch pumps we carry.

What is the 12 volt coil (solenoid valve) used for? Also, will the taper shaft fit a 12 volt dc clutch?

A: The original application for the proportional cartridge relief is unknown. The shaft will not fit the electric clutches we carry. It is unknown where one which would fit could be acquired.

Recently Viewed
Email a Friend
1.526 cu in Concentric Hydraulic Pump WP09A1B250
Item Number: 9-8981
Price: $79.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.526 cu in Concentric Hydraulic Pump WP09A1B250
Additional Comments:

Please wait...
Newsletter SignUp