1.95 cu in Cross 59P019-RBTRE Hydraulic Pump

Item Number: 9-10046

Price: $169.95
Back to top

1.95 cu in Cross 59P019-RBTRE Hydraulic Pump

1.95 cu in Cross 59P019-RBTRE Hydraulic Pump

item number: 9-10046 PRICE: $169.95 2 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-10046
1.95 cu in Cross 59P019-RBTRE Hydraulic Pump
Item Number: 9-10046
Price: $169.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
Unused old inventory, Cross Model 59P019-RBTRE aluminum hydraulic gear pump.

  • Manufacturer Cross
  • Model 59P019-RBTRE
  • Disp. 1.90 cu. in. / rev.
  • Pump Type Gear
  • Rotation CW
  • Pressure:
       3000 PSI Cont.
       3500 PSI Int.
  • Speed:
       3000 RPM max.
  • Flow:
       19 GPM at 2500 RPM and 2000 PSI.
  • Mount 2 bolt SAE B
  • Shaft Tapers from 1" O.D. to 5/8" O.D. over 1.4" (3.19 in/ft), keyed, end tapped 5/16"-24, 2-5/16" long
  • Inlet Port SAE 20
  • Outlet Port SAE 16
  • Size 5-1/2" x 7" x 6-1/4"
  • Shpg. 16 lb.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 2

Is your figure for taper on this shaft (3.19 in/ft) an approximation or the manufacturers spec? I have a clutch with a 3,0 in/ft spec on the drawing.

A: This was an OEM piece and the manufacturer no longer has any information on the special shaft dimensions. The dimensions listed are what were measured.

I have an SAE B mount on my antique truck to fit this pump. I can drill and shim to it fit clutch item # 1-2184-S-6. 1. Any reason not to use this pump? 2. Can I remove the pump and run the engine while the clutch and belt are still in place?

A: We cannot determine the suitability of that pump for your application. The pump could not be removed to leave the clutch in place. It is supported by the pump shaft and would not be held by anything.

Recently Viewed
Email a Friend
1.95 cu in Cross 59P019-RBTRE Hydraulic Pump
Item Number: 9-10046
Price: $169.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.95 cu in Cross 59P019-RBTRE Hydraulic Pump
Additional Comments:

Please wait...
Newsletter SignUp