3.0 cu in John Deere N AR94660 Radial Piston Pump

Item Number: 9-8095

Price: $1,049.95
Back to top

3.0 cu in John Deere N AR94660 Radial Piston Pump

3.0 cu in John Deere N AR94660 Radial Piston Pump

item number: 9-8095 PRICE: $1,049.95 9 In Stock Regular Stock Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-8095
3.0 cu in John Deere N AR94660 Radial Piston Pump
Item Number: 9-8095
Price: $1,049.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 43 of our current catalog

You may also consider:

Brand New, RELIANCE model NAR94660/NAR101807 replacement pressure compensated radial piston pump for use with many models of John Deere farm tractors and industrial equipment. See chart below for equipment models. Replaces part numbers AR94660 and AR101807 as well as other part numbers. Pump is 100 percent all new parts and have been run on test bench to check pressures and functionality. Two inlet ports for various applications. 

  • Disp. 3.0 cu. in. / rev.
  • Pump Type Radial Piston
  • Rotation CCW
  • Pressure 2350 PSI
  • Flow 24 GPM at 1750 RPM
  • Mount 4 bolt
  • Shaft 1-1/4" dia. 14T spline
  • Inlet Port SAE 20
  • Inlet/Return Port SAE 10
  • Outlet Port SAE 12
  • Drain Port SAE 3
  • Size 6-1/4" x 10" x 8"
  • Shpg. 74 lbs.

This hydraulic pump can be found in the following equipment applications:
Compactor: JD646, JD646B
Cotton Picker: 9950, 9960
Farm Tractor: 2030, 2350, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2755, 2840, 2940, 2950,2955, 3010, 3020, 3150, 3155, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230,4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640,4840, 5010, 5020, 6030, 7020
Loader: JD444, JD544, JD544A, JD544B, JD644, JD644A, JD644B
Loader/Backhoe: 300B, 302A, 401C, 401D, 510, JD300, JD310, JD400, JD500, JD500A, JD500B,JD600, JD700A
Motor Grader: 570A, 570B, JD570
Skidder: 340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, JD440, JD440A, JD440B,JD540, JD540A

Prop 65 Warning WARNING: Cancer and Reproductive Harm

Ask A Question
Submit a question for this product

Showing Questions of 18

Can this pump fit on 770A John Deere grader?

A: It will not fit a 770A.

Can you tell me if this part no.AR94660 jd hydraulic pump is made in China?

A: This pump was manufactured in USA.

this pump in applications lists 510 backhoe. will it fit my 510b backhoe?

A: You would have to consult John Deere or a distributor for the differences or compatibility between 510 and a 510B.


A: We have no information about that equipment and cannot say, unfortunately.

I have a jd 2520 with a 4 valve pump, can I use a 8 valve pump in its place?

A: We have no access to any John Deere literature to cross reference. We do know our model pump is compatible with the 2520 original equipment.

Does this replace a R42663 pump?

A: We do not cross that particular number to this pump. Your local dealer may be able to confirm if that number and our N AR94660 are the same thing.

I am currently working on a John Deere 2240 with a keyed shaft hydraulic pump. This appears to be the same pump with a spline shaft. Do you have the correct pump for this tractor?

A: We have no versions of this with a keyed shaft, no.

will the 9-8095 pump fit a 1977 310A john deere loader/ back hoe

A: The 310 is one of the models listed that is was intended for. No mention of the 'A' designation or any other is made.

Will this pump fit my 1973 John Deere 310 3 cylinder backhoe ? I have pictures of my pump

A: That does appear to be one of the listed models this pump was used on, and should be compatible with.

I have a JD 510 (straight, no letter suffix), which this pump should fit. However, my machine appears to have two of these pumps bolted together. Can you shed any light on this? Is this pump the front one or the back? Thanks

A: We have no information about how this pump was used in every application.

I like to have thé parts list of triste pump

A: We do not have a parts list for this pump.

will this pump fit a john deere 401a tractor?

A: That is not one of the listed tractors this pump was used on.

In your primary picture of AR94660 hydraulic pump... below the large 1 5/8" port... you can see a plastic plug that is plugging up a 3/8" fine-thread port. My question is... what is that 3/8" port used for?.... can it just be sealed with a 'plug'?, or is there a valving assembly that needs to be installed there?

A: Because this pump is used on so many different pieces of equipment, there may be ports that are unused in some applications and used in others. Any valving external to the pump may be equipment specific and would need to be transferred from the original if necessary.

what your warranty

A: This product in particular is covered by the manufacturer for a period of one year against defect in materials and workmanship. In general: Warranty Information Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty. We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment. Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages. NOTE! Warranties do not cover bent hydraulic cylinder shafts. We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required. Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.) In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation. A copy of the warranty, if any, for an item in this catalog may be obtained, at no charge, upon written request addressed to: Surplus Center Warranty Department 1015 West "O" St. Lincoln NE. 68528

How do check if the pump 3.0 or 4.0 on 4430

A: Something like that may require calling the manufacturer with the serial number of the tractor if it's not specified anywhere else.

will it fit a 310 B ?

A: That model is not on the list of units this was original equipment for.

Do u ship to Canada? The John Deere dealer up here tells me there are 2 possible sizes of hydraulic pumps for the 4430. Have u heard this before and do I then need to figure out which one my tractor has before I can order from you? Thanks.

A: We do ship to Canada. There is a 3.0 cubic inch pump, and a 4.0 cubic inch pump. It would be best to find what the original equipment displacement was.

Will this replace a 410C pump? If not do you have a replacement?

A: The information we have does not specifically state that this will fit that model. We have no data regarding what the original equipment was for that model.

Recently Viewed

You may also consider:

Email a Friend
3.0 cu in John Deere N AR94660 Radial Piston Pump
Item Number: 9-8095
Price: $1,049.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3.0 cu in John Deere N AR94660 Radial Piston Pump
Additional Comments:

Please wait...
Newsletter SignUp