Hydraforce Check Valve CV08-20-0-N-10

Item Number: 9-CV08-20-0-N-10

Price: $9.95
Back to top

Hydraforce Check Valve CV08-20-0-N-10

Hydraforce Check Valve CV08-20-0-N-10

item number: 9-CV08-20-0-N-10 PRICE: $9.95 Out of Stock Surplus Item

calculate shipping
Calculate Shipping for Item 9-CV08-20-0-N-10
Hydraforce Check Valve CV08-20-0-N-10
Item Number: 9-CV08-20-0-N-10
Price: $9.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.


A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.

The CV08-20 allows flow passage from 1 to 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at 1 to open to 2.


  • Brand HydraForce
  • Model CV08-20-0-N-10
  • Type Check Valve
  • Pressure Rating 3500 PSI max.
  • Pressure Setting 10 PSI bias spring
  • Flow 8 GPM max.
  • Fits into VC10-2 Cavity
  • Features 10 PSI bias spring
  • Overall Size 1-1/2" x 1" dia.
  • Shpg. 1/2 lb.

90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 1

I have a Fenner valve..which has a 2507AA SPX Stone Check Valve...this looks to be the same..Will it replace it, or, if not, do you have one that will..Please say yes. Thanks Jeff

A: They are very similar, but there is a 0.017" difference in the length which makes this one bottom out in the cavity just as the o-ring is sealing. We have gotten the correct check valve from SPX in the past. Please contact our Product Support department with that 2507AA number and we can check if we can still get it.

Recently Viewed
Email a Friend
Hydraforce Check Valve CV08-20-0-N-10
Item Number: 9-CV08-20-0-N-10
Price: $9.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

Hydraforce Check Valve CV08-20-0-N-10
Additional Comments:

Please wait...