SINGLE SPOOL 30 GPM BRAND OC CONTROL VALVE W/ FLOW CONTROL
Brand new, BRAND HYDRAULICS model DCF16M304LF1 directional control valve with flow control.
Combines a 4-way directional control valve with a full range, pressure-compensated, by-pass type flow control valve and a pilot-operated relief valve. Extremely fine flow metering to the work ports in direct proportion to the handle movement. Cast iron body with Buna-N O-rings. Handle included.
Will this valve work for a single acting cylinder?
A: No this will not work with a single acting cylinder.
Date Submitted: 01/12/2020
is this a good application to reverse the pump on a LPG trailer I am using a HM3 oil cooler
A: We have no information about the equipment or components used in that application and cannot say.
Date Submitted: 07/08/2018
Can this valve be fitted with a power beyond port? If not, is there a similar flow control motor spool which does allow for power beyond?
A: Unfortunately, this valve is not capable of power beyond, and we have no similar motor flow/directional control valve that is.
Date Submitted: 03/28/2017
Could this valve be operated by pneumatic pressure and would this valve be Good for dump truck application
A: With the proper spool adapters it could be pneumatically operated. However it is for a double acting cylinder and many dump trucks use single acting. Also it has the built in flow control which adds cost and probably is not really necessary for this type of application.
Date Submitted: 02/26/2016
Does this valve have a neutral spring return ?
A: The lever stays wherever you move it. This lets you turn on a hydraulic motor and let it continue running at your selected speed without having to hold the lever in place. There is not a centering spring.
Date Submitted: 02/09/2015
what is the minimum pressure relief this can be set at?