1 Spool 30 GPM Prince RD516CA5A4B1 Valve

Item Number: 9-1789

Price: $178.90
Back to top

1 Spool 30 GPM Prince RD516CA5A4B1 Valve

1 Spool 30 GPM Prince RD516CA5A4B1 Valve

item number: 9-1789 PRICE: $178.90 Out of Stock - More on Order Regular Stock Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-1789
1 Spool 30 GPM Prince RD516CA5A4B1 Valve
Item Number: 9-1789
Price: $178.90
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 30 of our current catalog
Brand new PRINCE. Hydraulic control valve for operating double acting cylinders. Monoblock gray cast iron body. Hard chrome plated spools. Load checks. Convertible to power beyond or closed center by changing conversion plug (see related items above).(click here to see the same valve with NPT ports)

  • Open Center
  • Spools One
  • Flow 30 GPM max.
  • Pressure 3000 PSI max.
  • Relief Valve factory set at 2000 PSI Adjustable 1500-3000 PSI
  • In/Out Ports SAE 12
  • Work Ports SAE 10
  • Mount 3 holes thru body
  • Size 9-1/2" x 5" x 3-1/4"
  • Shpg. 16 lbs.

Spool Details:
  Spool 1 Double acting spring centered

Ask A Question
Submit a question for this product

Showing Questions of 3

is there a return detent for this valve?

A: The 3 position manual detent kit item number is 9-4895-D.

Daars, Can I use this valve to command a hydraulic motor ??? he says he has an open center

A: This valve does come Open Center in relation to system type, but the work ports are blocked in neutral and will not allow a motor to coast to a stop if there is any flywheeling mass or inertia built up in the load, which could lead to damage in that situation.

I have a round bale wrapper that plugs into the existing remote control of the tractor and is operated by its onboard lever. I want to run lines from the remote to a separate spool to be located at the baler. then the lines from the wrapper will tie into that control valve. So by holding the tractor control lever open, it will feed hydraulic fluid to the control valve and then I could simply use this valve to operate the wrapper. I need it to be able to work both ways so that when I either push or pull the lever, the wrapper will either go one way or the other. Which of your control valves will work best for this application?

A: This valve would work in that application. You will need to confirm the type of hydraulic system the tractor utilizes-Open or Closed Center- and configure the valve to operate with that type of system. They come set up for Open Center systems out of the box. Item 9-4895-C will convert them to Closed Center. It is a double-acting cylinder spool, so it will move an actuator both ways.

Recently Viewed
Email a Friend
1 Spool 30 GPM Prince RD516CA5A4B1 Valve
Item Number: 9-1789
Price: $178.90
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1 Spool 30 GPM Prince RD516CA5A4B1 Valve
Additional Comments:

Please wait...
Newsletter SignUp