2 SPOOL 25 GPM PRINCE RD522CCAA5A4B1 OC VALVE
Brand new PRINCE. Hydraulic control valve for operating double acting cylinders. Monoblock gray cast iron body. Hard chrome plated spools. Load checks. Convertible to power beyond or closed center by changing conversion plug (see related items above).(click here to see the same valve with ORB ports)
Flow 25 GPM max.
Pressure 3000 PSI max.
Relief Valve factory set at 2000 PSI Adjustable 1500-3000 PSI
In/Out Ports 3/4" NPT
Work Ports 1/2" NPT
Mount 3 holes thru body
Size 9-1/2" x 7-1/2" x 3-1/4"
Shpg. 25 lbs.
Spool Details: Spool 1 Double acting spring centered Spool 2 Double acting spring centered
Do you know if I can convert a spool to 2 or 3 position detent? If so do you sell such a kit?
A: Yes, per the related items listed above, 9-4895-D is said kit.
Date Submitted: 02/19/2019
I am replacing the control valve on my old snowplow. One side is dark cylinders for angling, the other is as cylinder for lift, which needs to stay up when traveling. The pump is a power steering pump. Will this valve work?
A: Please call our product support team at 800-488-3407 so we may better assist you.
Date Submitted: 02/01/2019
Are there instructions for converting from open center to closed center that comes with the valve?
A: Converting this valve to Closed Center would require purchasing  9-4895-C [Not Included].
Those instructions should come with the valve, but they are also found on the product page for this item listed under the Additional Information button below the listed specs.
Date Submitted: 01/27/2019
Does this valve have load checks?
Date Submitted: 11/14/2017
Is this control valve the one to order for a ford 600 tractor. year 1955?
A: We have no information about the hydraulic systems on those units and cannot say.
Date Submitted: 08/23/2017
I have all ready bought a 1 9-4895-C CLOSED CENTER PLUG PRINCE RD5000 VALVES 660312005 14.70 2 9-6706-RD REMOTE CABLE TO VALVE CONNECTION KIT RD5000 SERIE 69.90 1 9-6704-J JOYSTICK CONTROLLER LEVER 123.70 for a valve i all ready had that i just found out is cracked. Just want to make sure that this valve will work. It's going on a loader and i don't really want a detent.and it does have psi out the for work ports Thanks for your time
A: The listed components are compatible with this valve, and with each other.
Date Submitted: 08/21/2017
Can a float detente be added to this valve ?
A: No, a float spool is longer with more machining and cannot be added afterwards.
Date Submitted: 05/12/2017
Is this compatible with a Gehl HL2500?
A: We do not have any information regarding the system type on that unit and cannot say. These valves come open center out of the box, but can be converted to closed center or power beyond.
Date Submitted: 03/10/2017
Is this a series or parallel spool valve?
A: This is a parallel valve.
Date Submitted: 01/30/2016
do you have to use a dump valve when using open center control valves?
A: Open center valves are used with continuous flow systems such as gear pumps or vane pumps. When not working the fluid circulates through the valve and back to tank.