Brand new PRINCE RD5000 series. Hydraulic control valve for operating reversible hydraulic motors. Monoblock gray cast iron body. Hard chrome plated spools. Parallel circuit allows any combination of spools to work simultaneously. Motoring spools, work ports connected to tank in neutral on all three spools. Open center. SPECIFICATIONS
Three spool valve
Max 25 GPM
Max 3000 PSI
Inlet/Outlet Ports 3/4" NPT
Work Ports 1/2" NPT
Adjustable relief valve 1500-3000 PSI factory set at 2000 PSI
Is this valve available with detents on all 3 controls? I need to operate the motors continuously, not intermittently.
A: With the addition of 9-4895-D, you can convert a spool to three-position detent. These valves do not come with detent action from the manufacturer.
Date Submitted: 10/10/2018
i am constructing a firewood processor. I need to operate two double acting cylinders and a the hydraulic motor running the saw then flow thru to the splitter valve. Is this valve going to work in that application/
A: This being a motor valve with the work ports tied to tank in neutral; the spools controlling cylinders will not hold a load unless additional lock valving is placed inline. If a valve is going to be plumbed downstream, a Power Beyond sleeve will need to be installed to feed said valve, and the return from both this valve and any downstream valve must be plumbed to tank.