ELECTRIC FLOW CONTROL VALVE Brand new, BRAND HYDRAULICS model CEP1500. Variable flow control valve with 12 volt DC controller for remote operation. 3 port design with controlled and excess flow outlet ports. Gives convenient hydraulic motor speed control from tractor cabs.
Is a replacement harness available to plug in from the control to the solenoid on the valve? Or just the end that plugs into the solenoid on the valve? Thank you.
A: No replacement harness is available. The Delphi PA66 connector which is used on the solenoid is available from a number of vendors online.
Date Submitted: 07/05/2018
i have motor rpm cossponding flow one liquid incrase or decrase rpm base electroics control val.
A: When using any flow control, when there is more flow the motor rpm will be faster; when there is less flow the motor rpm will be slower.
Date Submitted: 06/24/2018
Can the excess flow port be closed off for use on a closed center system?
Date Submitted: 05/01/2018
what else wil I require to reverse the flow while this valve is in the system
A: Depending on how your system is plumbed there will be a need for some additional hoses, the check valve or valves mentioned in a previous answer, and some fittings.
Date Submitted: 03/11/2018
I have the same valve and controller, do you offer a product that I can run this valve with by radio remote control?
A: We do not, no.
Date Submitted: 04/25/2017
Can I purchase the control box only?
A: Yes you can purchase the control box separately. The item number is 9-5178-BOX
Date Submitted: 04/28/2016
is this free flow in the reverse direction?
A: Oil can only from from the inlet toward the outlet ports on this valve. If you need to be able to have reverse flow a check valve must be installed in parallel to the valve to allow the reverse flow around this valve.
Date Submitted: 03/13/2015
What is the dc amp draw on this flow controller and on the valve in order to properly size fuse protection. Thank you
A: Maximum current is 1.5 amps.
Date Submitted: 02/20/2014
Can I buy just the valve? I don't need the controller for it. I need two of the valves.
A: Yes, we can special order just the valve itself. Please contact email@example.com for current pricing.