12 VDC HYDRAULIC SOLENOID VALVE Brand new, EATON-VICKERS DG4V-3 series, double-solenoid control valve. Spring centering spool. Manual override on solenoids. Subplate mounting requires D03 subplate (sold separately) for port connections. Use with two Hirschmann connectors (sold separately) for wiring.
I need a valve that looks like this with threaded ports do you have more pictures of this valve Is must run a hyd piston off of valve body
A: It requires a D03 Sub plate. This item connects to the sub plate by 4 cap screws and o-rings. Te sub plate will have the threaded ports.
Date Submitted: 01/22/2019
So the hot wire will go to the toggle switch to control the solenoid left and right?
A: That is the best way to do it, yes.
Date Submitted: 07/06/2018
I'm looking for a DC solenoid for a hydraulic winch control. It's needs to have the ports going to the winch blocked when not powered and the pressure side dumped to tank. From my understanding this is the correct valve for such.
A: No, this valve is closed center, meaning the pressure and tank ports are also blocked in neutral. You will need item 9-6136 to have work ports blocked and pressure to tank in neutral.
Date Submitted: 03/07/2017
How do you override the valve manually? Is there a valve lever or do you need a separate valve body to override it?
A: There is a small stem flush with the end of the coil in the center of the spool that can be pushed on with a small punch or other like object to manually shuttle the spool.
Date Submitted: 10/28/2016
Does this valve also control speed of motors or just direction?
A: This would only provide directional control. Cannot provide speed variation.