Will this fit into item 9-5883-1 1 station DO3 Subplate Port?
A: No. These are for completely different systems and are not compatible.
Date Submitted: 01/08/2019
I have a Walvoil control on an early 2000 Jinma 604 tractor. Will this power beyond fit a Walvoil.
A: This was made to fit a Brand Hydraulics valve. We have no data to suggest any compatibility.
Date Submitted: 08/19/2018
I need a power beyond adapter for a ford 555d back hoe. The listed part number is E9NND677AA. Will this part possibly work? 9-7401-B Thank you, F Sims
A: We have no information regarding the valve in which that OEM part number fits, and cannot state compatibility.
Date Submitted: 05/28/2018
Does the valve serviced by the "power beyond" need to be open center or closed?
A: The downstream valve can be either, depending on what the main system is designed for. Whatever system type the system was originally before any additional valving was added is what the final valve needs to be to allow for correct system operation. All Power Beyond valves upstream should still have their own dedicated return lines open to tank; as well as the final return on the last valve having its own path.
Date Submitted: 12/31/2017
I need a power beyond kit for a Husco 9210 valve. Will this work or do you have one that will work?
A: We have no power beyond conversions for Husco valves. It is unlikely that this sleeve will work.
Date Submitted: 09/24/2017
What size is the female end on the valve ?
A: The female port on the power beyond sleeve is SAE 8. The cavity on the valve this screws into is also SAE 8.
Date Submitted: 05/05/2017
Will this fit a Prince LVT1GB5AB7 Loader Valve? If not do you have one for that valve, or a part number?
A: This will not fit that valve. We do not stock the closed center/power beyond conversion plug for that valve. We very likely could order it. The Prince part number is 200018001.
Date Submitted: 03/20/2017
I have the 9-7401 on my ford 1700 and want to add 3rd function root grapple. Where is the power beyond port and where is the return port. there are 6 ports on top and 1 on each side.4 ports on top are in use A1 A2 B1 B2.the other 2 on top are plugged. the ports on the side are in use they go to the back of the tractor, the inlet and outlet . what to do??
A: The Power Beyond sleeve is installed in the outlet port on the side. This will become the pressurized fluid port to the downstream valve. The plugged port adjacent on top then becomes the low pressure return for this valve. Both this valve and the downstream valve must have a return to tank hooked up.
Date Submitted: 03/14/2016
Why can't the return from the newly installed valve just be connected to the pressure side of the valve down stream without the power beyond adapter?
A: The exhaust core in a valve (where the return port is connected) is not designed for high pressure. It is possible to actually crack a valve if another downstream valve is connected to the return port.
A power beyond adapter adds an outlet port that connects the power core (in the middle of the casting) to safely deliver full pressure to the downstream valve.
Date Submitted: 02/07/2016
Is this in stock
A: Yes it is in stock. Our site displays the quantity on hand in green just below the price of the item.
Date Submitted: 11/10/2015
what is the power beyond kit for?
A: Power beyond is added to a control valve when you have another valve downstream. It allows full system pressure to be supplied to that valve whenever the 9-7401 is not being used.