5.9 CU-IN TORQUE GENERATOR New, Char-Lynn model 217-1050 torque generator. Can be connected directly to steering shaft on manual steering systems for power assist to the steering linkage. Also use for manually operated gates, control valves, other situations requiring powerful rotary motion from low input. Made to be mounted with no axial or radial loads on either shaft, not made for use with a pinion gear or sprocket. Gerotor power element.
5.9 Cu-in/rev. disp.
3.5 GPM recommended input flow
1,000 PSI max. pressure
118 RPM max. speed
700 in-lb. output torque @ 1,000 PSI
14-22 in-lb. input torque
SAE 6 ports
50 lb. max. output shaft side-load
7/8" dia. x 1-1/2" long, woodruff-keyed shafts w/ 5/16" dia. thru-hole in both
Three 5/16"-18 mounting holes on 2-1/2" B.C. on input end