9.7 cu in Steering Valve (Torque Generator)

9.7 CU-IN TORQUE GENERATOR
New, Char-Lynn model 217-1048 torque generator. Can be connected directly to steering shaft on manual steering systems for power assist to the steering linkage. Also use for manually operated gates, control valves, other situations requiring powerful rotary motion from low input. Made to be mounted with no axial or radial loads on either shaft, not made for use with a pinion gear or sprocket. Gerotor power element.

SPECIFICATIONS

• 9.7 Cu-in/rev. disp.
• 5 GPM recommended input flow
• 1,000 PSI max. pressure
• 102 RPM max. speed
• 1,100 in-lb. output torque @ 1,000 PSI
• 14-22 in-lb. input torque
• SAE 6 ports
• 50 lb. max. output shaft side-load
• 7/8" dia. x 1-1/2" long, woodruff-keyed shafts w/ 5/16" dia. thru-hole in both
• Three 5/16"-18 mounting holes on 2-1/2" B.C. on input end
• Overall size 6-3/4" x 3-5/8" x 3-13/32"
• Shpg. 11 lb.

California Residents

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov