20:1 Gear Reducer F71020B4GT2

Item Number: 13-1509

Price: $79.95
Back to top

20:1 Gear Reducer F71020B4GT2

20:1 Gear Reducer F71020B4GT2

item number: 13-1509 PRICE: $79.95 15 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 13-1509
20:1 Gear Reducer F71020B4GT2
Item Number: 13-1509
Price: $79.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
New, BOSTON, model F71020B4GT2, cast iron right angle gear reducer. Left side output.

  • Ratio 20:1
  • Power 1/4 HP max.
  • Input Speed 1750 RPM max.
  • Output Speed 87.5 RPM max.
  • Torque 149 in.lbs. max.
  • Output Centerline Height 1.31"
  • Motor Mount 42CZ
  • Input Shaft Female 1/2" bore
  • OutputShaft 1/2" dia. x 1-1/4" with 1/8" keyway & flat
  • Mount 4 holes 1.69" x 2.63" top and bottom
  • Size 4-3/4" x 4" x 4-1/4"
  • Shpg. 8 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 2

This gear reducer says 1\4 hp max. Will a 1\3 hp motor be too big? Thanks.

A: Yes, putting that much extra HP through it, if the load is heavy enough, will shell the gears out in fairly short order. Try to stick with what it's rated for.

What kind of motor do I need for this gear reducer? do you have one in stock? is this a dc motor? Thank you for your assistance Ramon Briceno

A: To bolt up directly requires a motor with a 42C frame. We don't have any like that right now.

Recently Viewed
Email a Friend
20:1 Gear Reducer F71020B4GT2
Item Number: 13-1509
Price: $79.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

20:1 Gear Reducer F71020B4GT2
Additional Comments:

Please wait...
Newsletter SignUp