40:1 Right Angle Cast Iron Worm Gear Reducer 3.35 HP 145TC Left Output Worldwide HDRF-325-40-L-145TC

40:1 RIGHT ANGLE WORM GEAR REDUCER
Brand new, WorldWide Electric right-angle worm gear reducer. Standard NEMA-C motor mounting flange. Cast iron housing. Interior oil channel directly guides and constantly lube bearings. Embedded double-lip oil seals. Tapered roller bearings on output and input shafts. Double bearings used on both shafts. A set of four tapped mounting holes on top and bottom of housing. Shipped filled with Mobil #SHC632 synthetic oil for the "A" position. (Refer to installation and maintenance manual for oil capacity for different mounting positions)

SPECIFICATIONS

• Brand WorldWide Electric
• Model Number HDRF-325-40-L-145TC
• Box Size 325 (3.25" Center of Input Shaft to Center of Output Shaft)
• Ratio 40:1
• Input Speed 1750 RPM max.
• Output Speed 44 RPM max.
• Mechanical HP (1.0 SF) Ratings
    Input HP 3.35 HP
    Output Torque 3692 in-lb.
    Output HP 2.55 HP
• Thermal Capacity Ratings
    Input HP 1.96 HP
    Output Torque 2156 in-lb.
    Output HP 1.49 HP
• Efficiency 76%
• Overhung Load 1200 lbs.
• Output Shaft Thrust Load 1100 lbs.
• Output Shaft Centerline Height 3.5"
• Motor Mount NEMA 145TC w/ four 0.433" dia. holes on 5.875" dia. B.C.
• Input Bore 7/8" keyed bore
• Output Type Left Hand Shaft
• Output Shaft 1-3/8" dia. x 3-1/4" keyed
• Mount Two sets of four 7/16"-14 tapped holes on 7-1/2" x 4" centers
• Size 11-7/16" x 7-3/4" x 10"
• Shpg. 84 lbs.

California Residents

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov