Brand new. Right angle gearbox. One piece cast iron gear case and bearing caps. Roller bearings.
Solid output shaft extends from both sides of case.
Ships without oil, user must add 1/3 quart of 80-90 W oil prior to use.
A: Yes. The diagram is only to show how the rotations relate to each other with a given input. If turned CCW, the directions will all be opposite of shown.
Date Submitted: 10/05/2017
What is the max rpm for these gearbox
A: Max RPM is 1800.
Date Submitted: 07/10/2017
If shaft #3 is turned CW is shaft #2 Turning CCW? thx....
A: Yes, that is exactly what the diagram states. We call out the shaft rotation as facing the shaft, and because they are opposite ends of the same shaft, the orientations will be called out opposite.
Date Submitted: 03/31/2017
When using this gearbox in cold climate condition, What oil viscosity do you recommend?
A: We have no information beyond making a comparison between what other comparable boxes have for published data available on the internet. If they have a recommendation for a cold climate oil, and the standard climate lubricant is comparable to the required oil for this box, it may work in a similar fashion with this box.
Date Submitted: 01/07/2017
Does this gearbox ship wet or dry? If it ships dry, What oil do I use?
A: These boxes ship dry. There is a tag that comes with it detailing what type and quantity of oil to use.
Date Submitted: 01/07/2017
Are these straight or spiral gears? And are you able to offer them in 1.5:1 or 1:1.5 this would be for the 32 hp right angle and the "T" box
A: These have straight cut gears. Sorry only available in the configurations listed.
Date Submitted: 03/04/2015
Can you replace the output shaft with a longer one? Im going to use it for a go kart
A: We have these only as shown with no options available.
Date Submitted: 08/15/2014
hello im just thinking of buying one of these gearboxes,just wondering if this will power a 3pt snowblower ? im only asking because your specs call the short shaft imput and the long output,my setup for the mach is long shaft is the imput and driver for the fan ,the short is for power to the auger,also can these be mounted "upside down",if i need to change direction of ether shafts,i dont know if that makes sense,thank you
A: Any of the shafts could be used for input. Mounting could be at any angle so long as the breather in the side of the box is piped so that the oil doesn't run out.
Date Submitted: 08/03/2014
What is country of origin?
A: These are made in China. We have been carrying the 2 shaft version of this (item 13-1423) since 2008. This is a new model we have just added for this year.