Brand new. Right angle gearbox. One piece cast iron gear case and bearing caps. Roller bearings.
Shafts rotate in same direction when viewed from end.
Ships without oil, user must add 1/3 quart of 80-90 W oil prior to use.
Can the shafts rotate in either direction? If I put a breather hose, can I rotate it and run one shaft vertical and one horizontal? Thanks
Date Submitted: 09/01/2017
will these gearboxes work on a 6 wheel drive atv ? it has a 20 h.p. motor and axle and gearbox rpm s will be around 200 - 300 r.p.m. ? the machine is now driven using # 50 chain between each axle. i would like to change to shaft drive and wonder if these would hold up. thank you john 2 and 3 way gearboxes
A: While that sounds like it would be within the operating conditions allowed, we cannot make a determination on longevity.
Date Submitted: 01/19/2017
Can this gearbox be used for recieving the rpms of a 20hp engines?
A: No, these gearboxes are not rated for gas engine speeds. The specs state 1800 or less rpm for proper operation.
Date Submitted: 08/02/2016
Is it possible for the gear box to get wet? Can it hold up if it gets wet?
A: It is sealed for outdoor use, but it cannot be submerged.
Date Submitted: 07/30/2016
Would this unit be strong enough to make a 90 degree turn if place in-line of a rack and pinion auto power steering shaft?
A: This is not rated for any kind of automotive steering application.
Date Submitted: 05/10/2016
Can the input shaft be rotated in either direction ( CW or CCW)? In other words, is the gearbox reversible?
A: Yes you can turn the input either direction. The output shaft is always the same rotation as the input on this gearbox.