3:1 Right Angle Gear Reducer

Item Number: 13-1572

Price: $189.95
Back to top

3:1 Right Angle Gear Reducer

3:1 Right Angle Gear Reducer

item number: 13-1572 PRICE: $189.95 Out of Stock - No Longer Available
Calculate Shipping for Item 13-1572
3:1 Right Angle Gear Reducer
Item Number: 13-1572
Price: $189.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.

New. OMNI-GEAR HR-200 series model 251199 right angle gearbox. One piece cast iron gear case and bearing caps. Roller bearings. Spiral bevel gears. Solid output shaft extends out each side of housing.
  • Ratio 3:1
  • Input Power 9 HP continuous
  • Input Speed 540 RPM max.
  • Output Torque 3112 in.lbs.
  • Input Shaft 1" diam. x 2-1/8" w/1/4" keyway
  • Output Shafts 1-3/8" diam. 6 tooth spline x 3-3/4" 
  • Mount Four 3/8-16 tapped holes, 3" x 4" 
  • Size 8-1/4" x5-5/8" x 5-7/8"
  • Shpg. 34 lbs.
Ask A Question

Showing Questions of 6

which direction is this box supposed to be driven? CW or CCW? can the box be mounted 180 degrees to get output shaftes to turn ether way?

A: This gear reducer can be turned either CW or CCW. It can be mounted 180 degrees to get your desired output direction.

Do you have a basic dimesional drawing of the gearbox you can send me. I need for basic design application. Tks Tom

A: We don't have any dimensional drawing for this gearbox, nor were we able to find one on the manufacturer's website.

3:1 TDrive gear box item #13 - 1572 does both axle shafts turn in the same direction? The ratio 3:1 is the 3 the main input shaft and the 1 the two axle revolutions?

A: Yes, when viewed from the smooth keyed input shaft, the splined output shafts both turn the same direction. The 3:1 ratio does mean that for every 3 turns of the input, the outputs turn once.

Which shaft is the input shaft? 540RPM spline shaft or the small shaft?

A: The input is marked as the 1" shaft.

Can you confirm this for me? 540 RPM on the spline shaft & then it reduces the speed for the other smaller shaft?

A: No. The smooth keyed shaft is the input, and the 540 splined shafts are the outputs.

Can this be run in reverse as a speed increaser?

A: That information is not specified as a possibility by the manufacturer in their literature.

Recently Viewed
Email a Friend
3:1 Right Angle Gear Reducer
Item Number: 13-1572
Price: $189.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3:1 Right Angle Gear Reducer
Additional Comments:

Please wait...
Newsletter SignUp