Brand new. OMNI-GEAR LR-200 series model 251075 right angle gearbox. One piece cast iron gear case and bearing caps. Roller bearings. Spiral bevel gears. Hollow output with full length keyway. Ships without oil, user must add oil prior to use per user ‘s
Input Power 32 HP continuous
Input Speed 2000 RPM max.
Output Torque 950 in.lbs.
Input Shaft 1" diam. x 1-3/4" w/1/4" crosshole and snap ring groove
Output Shaft Hollow 1" diam. x 5-3/4" w/ 1/4" keyway
A: We have just heard from our vendor for item 13-1564 Omni Gear LR-200 3:1 Speed Reducer 251075.
Unfortunately, they have no expected ship date for this product on the horizon and have stated to us that the further delay could last as long as 02/20
Date Submitted: 02/21/2019
when do you plan on receiving more of the out of stock 3 to 1 gear boxes in
A: We have an order in for more, due 8/31.
Date Submitted: 07/25/2018
What diameter shaft slides inside the hollow output shaft?
A: The hollow output is meant for use with 1" smooth keyed shaft.
Date Submitted: 07/13/2018
My catalog shows input power of 32 HP, website says 13 HP. Which is right?
A: The 32 Hp rating in the catalog is correct. The web page will be changed.
Date Submitted: 03/05/2018
What is the wait time on order to delivery time of this product lr-200 251075
A: We have an order for these due in May. Any backorders against it will be filled as soon as stock arrives.
Date Submitted: 02/26/2018
No. 13-1564 Is the Input Shaft the "1" Ratio ?
A: 3 turns of the male input shaft will result in one full turn of the female hollow output shaft.
Date Submitted: 09/22/2017
where can I get this in Canada Omni LR200 3:1 right angle gear box
A: We do not know where this is available in Canada.
Date Submitted: 09/22/2017
Do they make this with a higher horse power ?
A: We do not carry one in a higher horsepower.
Date Submitted: 04/01/2017
Is this a new unit, or rebuilt?
A: The units are brand new from the manufacturer.
Date Submitted: 03/09/2017
Is this unit shipped without oil? What type of oil does it require? How much oil does it require? Any specific instructions to filling it with the required oil?
A: They do appear to ship dry. No capacity is stated on the box, or on the diagram available on the item's web page which specifies the type of oil to use. Typically the level is slightly over a third full.
Date Submitted: 02/10/2017
Will this work on John Deere 60 inch broom
A: We have no way of knowing that information.
Date Submitted: 02/02/2017
Is this the same gear box that fits the John Deere 26 Rotary Broom? JOHN DEERE OEM GEAR BOX AM141737?
A: We have no information regarding that model or what this box will interchange with.
Date Submitted: 01/29/2017
I see the mount as illustrated NOTE. Can this be mounted with the input shaft horizontal and output vertical?
A: That should be fine. The lubricant level should be below the vent in either orientation.
Date Submitted: 12/07/2016
HI! What is the weight of the unit
A: The unit itself is 20 lb.
Date Submitted: 05/27/2016
does the hollow go thru whole way and is it 30-1 reduction?
A: It is hollow the full way through, but it is only 3:1, not 30:1.
Date Submitted: 04/15/2016
Is there a preferred direction for 'input' and 'output'?