SINGLE GROOVE PULLEY Brand new. Fractional HP, single groove, cast iron pulley with keyway and one set-screw. For use with type "A" and "B" belts. Fully balanced.
Outside Diameter 18.75"
Belt Type A (1/2") Datum Diameter 18.00"
Belt Type B (5/8") Datum Diameter 18.40"
Shpg. 16 lbs.
Outside Diameter Diameter measured at the outside of the pulley.
Datum Diameter The datum diameters are an industry standard reference point used for calculations such as center distance and belt length. The datum system replaces the pitch system for classical belts and pulleys to compensate for differences in manufacturers construction of belts.
What is the hub damenter where the 1-7/16 hole is?
Date Submitted: 02/27/2019
Good afternoon, I would like to know if you have in stock 20 pieces of this pulley? Also, what is the hub diameter for this item? Because we need to have at least a hub diameter of 60mm(2:3/8") with a LTB of 37mm (1:1/2"). Waiting for your feedback, Regards,
A: Please contact our Product Support staff at 1-800-488-3407 so that we may better assist you.
Date Submitted: 02/22/2019
do you sell 1 7/16" shaft
A: We do not.
Date Submitted: 03/27/2018
Are these pulleys balanced? Do you have 1 1/2" bore?
A: The pulleys are balanced. We do not have a fixed bore in 1.5". We do have it in the H-bushing version of this pulley.
Date Submitted: 03/02/2018
Can you give me a Price for shipping 2 pulleys to Nova Scotia
A: Please contact our Customer Service department with shipping details and we can quote you.
Date Submitted: 01/31/2018
What is the v-belt size needed for this sheave?
A: The outer circumference of this pulley is 58.875". A 5/8" v belt that is 59" on the outside may be too loose, and a belt that is 58" on the outside may be impossible to roll on.
Date Submitted: 05/17/2017
I'm looking for a 16 to 18" o.d. single groove A belt pulley.inside bore is 1 7/16.. I know you have one for around $44.00.. Shipping added in probably puts this at over$60,more than I want to spend. This is for a small farm elevator, would you have a factory second,or a returned or used pulley you`d sell for less money?
A: We typically do not. If we did, it would be advertised in our Bargain Bin.
Date Submitted: 11/03/2016
Can you tell me what the weight per unit is for this part? Thanks.
A: The unboxed weight of this product is roughly 13.2 lbs.
Date Submitted: 02/24/2016
Are you able to Acquire bigger wheel from this same manufacturer? We need 25" OD plus/minus up to five inches. Thank You!
A: Sorry these are the largest diameter pulleys that our supplier offers.