Shipping Notes: * UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
DOUBLE GROOVE PULLEY Brand new. Fractional HP, double groove, cast iron pulley with keyway and one set-screw. For use with type "A" and "B" belts. Fully balanced.
Bore 1"
Outside Diameter 2.75"
Belt Type A (1/2") Datum Diameter 2.10"
Belt Type B (5/8") Datum Diameter 2.50"
Shpg. 2 lbs.
Outside Diameter Diameter measured at the outside of the pulley.
Datum Diameter The datum diameters are an industry standard reference point used for calculations such as center distance and belt length. The datum system replaces the pitch system for classical belts and pulleys to compensate for differences in manufacturers construction of belts.
Will this pulley fit this hydraulic motor shaft? http://www.surpluscenter.com/Hydraulics/Hydraulic-Motors/Low-Speed-High-Torque-Hydraulic-Motors/2-5-cu-in-WHITE-DRIVE-PRODUCTS-256040A3110AAAAA-HYDRAULIC-MOTOR-9-8835-A.axd
A: Yes, it should.
Date Submitted: 10/01/2017
Hi, can you please tell me the exact weight of this particular pulley
A: The pulley weight without packaging is 1.7 lbs, with the manufacturer's packaging; 1.75 lbs.
Date Submitted: 07/20/2017
what is the length of the bore thank you
A: The total length of the bore is 1.975". Due to the dish on the back side, the total width overall is 2.22".
Date Submitted: 05/13/2017
Is this for 4L V-belt? Thank you
A: Yes, it will work with either 1/2" (4L) or 5/8" (5L) belts. The 1/2" will ride slightly lower in the pulley groove.