Shipping Notes: * UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
DOUBLE GROOVE PULLEY Brand new. Fractional HP, double groove, cast iron pulley with keyway and one set-screw. For use with type "A" and "B" belts. Fully balanced.
Bore 1"
Outside Diameter 5.95"
Belt Type A (1/2") Datum Diameter 5.20"
Belt Type B (5/8") Datum Diameter 5.60"
Shpg. 6 lbs.
Outside Diameter Diameter measured at the outside of the pulley.
Datum Diameter The datum diameters are an industry standard reference point used for calculations such as center distance and belt length. The datum system replaces the pitch system for classical belts and pulleys to compensate for differences in manufacturers construction of belts.
What is the maximum horsepower driver that this pulley (1-2BK65-E) can be used with? My application is for a 13 hp gasoline engine driver with 1 inch output shaft. Do you have anything in a 2 groove (A belt) with OD of 5.5-6.0 inches?
A: Other customers have put this size pulley on 15 Hp electric motors before will good results. We do not have any pulleys specifically for A belts. These pulleys will run either A or B, but the A will sink in farther. The o.d. of an A belt in this pulley will measure approximately 5.575".
Date Submitted: 03/06/2018
Hi, I am looking for a double V pulley with 1" fixed bore x 6" that will accept 3L belts !! Is your 5.95 1 bore 2 groove pulley with item # 1-2BK62-E the right pulley ? Thank You
A: We have no pulleys for 3L belts, save for items 1-995-B and 1-2540.