Shipping Notes: * UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
SPLINED TO KEYED SHAFT ADAPTER Brand new, G & G MFG. model 113-1600 steel pump adapter. Use to adapt standard 1" diameter, straight keyed shafts to 1-3/8" 6 tooth spline.
A: There is a setscrew over the keyway on the 1" round end.
Date Submitted: 08/30/2018
Do you make the (part # 1-2241 with a 5/8 " diameter) with keyway.
A: Our vendor does not, no.
Date Submitted: 08/12/2018
when will more of these come in
A: An order for these is due to us on 5/31.
Date Submitted: 05/21/2018
Is the 1/ 3/8 6 spline end solid or is there a hole through it. - I bought a cheap 'made in china' spline and it failed from fatigue because it was not solid.
A: Yes, it is solid. There is a divot in the end where it was held on the lathe, but that only goes in about a quarter inch.
Date Submitted: 09/05/2017
do you ship international (ireland) and if so would you have a rough idea of cost?
A: We do ship internationally. Please contact our Customer Service department with your information and we can work up a quote for you.
Date Submitted: 04/11/2017
I realize that this slips over the keyed shaft; however, how is the adapter connected to the shaft? Does it clamp to the shaft or have a through bolt?
A: The adapter is keyed, with a set screw over the key.
Date Submitted: 01/08/2017
is the part, especially the spline side 1-3/8 in. machinable and weldable?
A: Yes. This is not hardened steel.
Date Submitted: 10/25/2016
What size keyway does this have?
A: This item has a 1/4" keyway.
Date Submitted: 08/11/2016
do you have this item with a 1 1/8 smooth bore shaft
A: Sorry the only sizes available are 1" (this item) and 1-1/4" item 1-2242.
Date Submitted: 02/04/2016
Is there a set screw or something to fix it to the pump shaft?