I require two diferent sizes in the same coupler, 3/4 13T one side and 1/2-13T other side, do you have it?
A: No we do not have a coupler with those specifications.
Date Submitted: 01/17/2020
What is the pressure angle?
A: The standard pressure angle for 3/4"-11 tooth spline is 30 degrees.
Date Submitted: 03/23/2018
I HAVE A YAMAHA GOLF DIFFERENTIAL THAT HAS A 3/4 SHAFT THAT I COUNT 10 SPLINES BUT MAY HAVE 11. DO YOU HAVE A COUPLER THAT WILL FIT THE YAMAHA DIFF SHAFT? PLEASE LET ME KNOW SOON. THANK YOU
A: This will fit on 3/4" 11 tooth splined shafting. We have no information regarding what spline is on that differential.
Date Submitted: 08/04/2017
what is the outer diameter of this piece
A: The o.d. is 1.5".
Date Submitted: 11/28/2016
Do you have a shaft the matches this coupler I need the coupler and 2 feet of shaft. Thanks Tom item # 1-2985
A: We do not currently have the 3/4"-11 splined shafting in any length.
Date Submitted: 09/19/2016
Dose this fit Cummins n14 PS pump
A: If it is a 3/4" 11 tooth spline shaft, it should. We have no way of knowing what is on those pumps.
Date Submitted: 09/03/2016
is the inside of this coupler possibly a bit smaller than 3/4", I have an 11 splined shaft on a Sundstrand hydrostate that is 18.25 mm across(slightly smaller than 3/4"). do you maybe have another product that would be more for my needs, hoping to go from that shaft to a lovejoy coupling.
A: This is the only 11 tooth coupler we have. The difference is probably too much to use with your pump.