7/8" 13T Splined Coupling G & G Mfg 163-1413 Item Number: 1-1392 Price: $8.15
Estimate shipping to:
Shipping Notes: * UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
Do you sell fuily-splined shaft stock in the same size (13T x 7/8") as this coupling?
A: No, we do not sell fully splined shaft in 7/8" 13T.
Date Submitted: 10/15/2019
I purchased two splined couplers 7/8" 13T Splined Coupling 163-1413 ITEM NUMBER: 1-1392. Unfortunately we need the same part but have the spline only have the length of the part and the other end blank so it can be bored and threaded to an 18 mm, 1.5 pitch. Do you have or does your supplier make the same size coupler with the spline going only 1/2 way through the part? thanks Dave Hardman
A: No we do not have a solid coupler that is only half splined.
Date Submitted: 04/24/2019
Wher is the 7/8 dimension taken from?
A: This coupling will fit on a 7/8" 13 spline shaft.
Date Submitted: 02/08/2019
Do you have a 50-15 sprocket that will fit this?
A: We do carry a #50 pitch chain 15 tooth sprocket with a 1.5" bore. This could be inserted into the bore and welded to make it work.
Date Submitted: 12/16/2018
Hi there I'm looking for a 13 to splined coupling 7/8 and diameter ID but I needed to be roughly four in long is this something you could help me with?
A: We do not have access to a coupler that long.
Date Submitted: 10/29/2018
I am looking for a similar coupling. I need a 13/16 by 23 tooth internal splined coupling with a smooth cylindrical outside diameter? Can you help me? Thanks
A: We do not have a splined coupler like that.
Date Submitted: 05/02/2018
Do you sell shaft that will fit this coupler
A: No, we do not.
Date Submitted: 01/15/2018
do you carry any 7/8" 13t splined shafting?
A: No, we do not.
Date Submitted: 01/13/2018
Do the splines go completely through coupler
A: Yes, the coupler is splined the full length of the bore.
Date Submitted: 10/16/2017
I am looking for an adaptor to go over an 1-1/8" shaft to a 1-1/8 13 tooth spline.
A: We have no such adapter, unfortunately. That may be a non-standard size/spline.
Date Submitted: 05/01/2017
The coupler I need to replace is 3 in in length. the one listed is 2 1/4 in Do you have a 3 in coupler?
A: We do not.
Date Submitted: 03/30/2017
Where do you measure the coupling to obtain the 7/8 diameter? Rhanks
A: The 7/8" is the outside diameter of the splined shaft that this would couple to.
Date Submitted: 03/05/2016
Do you have the shaft ? I need one 21 7/8 " long . 7/8 shaft 13 spline . Thanks Gene
A: Sorry we do not have any 7/8-13 splined shafting.
Date Submitted: 02/24/2016
I been searching through the website but could find the size do you guys have a 7/8 with 13t and an od of 2" I will appreciate your time
A: Sorry this is the only size of coupler we have for a 13 tooth 7/8 dia. shaft.