12T 3/4 Bore 41P Sprocket

Item Number: 1-2579

Price: $3.00
TOP
Back to top

12T 3/4 Bore 41P Sprocket

12T 3/4 Bore 41P Sprocket

item number: 1-2579 PRICE: $3.00 169 In Stock Surplus Item


calculate shipping
Calculate Shipping for Item 1-2579
12T 3/4 Bore 41P Sprocket
Item Number: 1-2579
Price: $3.00
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
Description
12 TOOTH 41 PITCH SPROCKET
New, machined steel sprocket, hardened teeth. Tapped for two set-screws, 90° apart (set-screws not included).

SPECIFICATIONS
  • 41 pitch
  • 12 teeth
  • 3/4" bore, keyed
  • 2.17" O.D.
  • 7/8" hub thru-length
  • 1-7/16" hub O.D.
  • Shpg. 3/4 lb.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 2

Hello, I need 2 rollers for a garage door opener chain. My measurements are 1/2" pin to pin and only 1/4" wide so it looks like it fits a 41 chain. I tried 40 and it way to big. anyway, is this the only 41p sprockets you have?

A: Yes, these are the only 41 pitch sprockets we have. Garage door chain can be even narrower than 41 pitch, and is classified as #43 or #65 pitch chain at times.

Re-ITEM NUMBER: 1-2579 Hi, can you please tell me the measurements between the teeth, and if it's 6mm do you do 22mm bore or 12mm bore. Thank you

A: This is for 41 pitch chain. If you measure from center to center on the rollers it is 1/2". 41 chain is narrower than 40 pitch so it won't fit onto 40 pitch sprockets but you can use 40 pitch chain on 41 sprockets. Sorry we don't have any metric bore sprockets.

Recently Viewed
Email a Friend
12T 3/4 Bore 41P Sprocket
Item Number: 1-2579
Price: $3.00
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

12T 3/4 Bore 41P Sprocket
Additional Comments:

Please wait...
Newsletter SignUp