3" Trash Pump Head

3" TRASH PUMP HEAD
New, HYPRO 3" aluminum trash pump head. Simply add your own 6.5 HP engine with 3/4" keyed crankshaft. Removeable front cover allows easy cleanout. Cast iron volute and impellor for long life. Will handle solids up to 1" dia.  EPDM mechanical shaft seal and inlet valve to retain prime after initial setup.

SPECIFICATIONS HP Required 6.5 minimum Ports 3" NPT Input Shaft Required 3/4" dia. keyed Max. head 106 ft.(46 PSI) Max. suction lift 23 ft. Mtg pattern to engine 4 holes on 3-5/8" bolt circle furnished with 5/16-24 bolts Base mount Slotted 9-1/2" c/c Size 12" x 10" x 13" Shpg. 40 lbs.

Flow Rate @ Ft. of head (PSI)
Flow Rate	Ft of Head (PSI)
272 GPM	@ 12 Ft. (5 PSI)
179 GPM	@ 58 Ft. (25 PSI)
50 GPM	@ 93 Ft. (40 PSI)

California Residents

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov