8"x5.5" Steel Wheel Rim 3/4" Bore w/Bearings

Item Number: 1-5079

Price: $5.99
Back to top

8"x5.5" Steel Wheel Rim 3/4" Bore w/Bearings

8"x5.5" Steel Wheel Rim 3/4" Bore w/Bearings

item number: 1-5079 PRICE: $5.99 2879 In Stock Surplus Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 1-5079
8"x5.5" Steel Wheel Rim 3/4" Bore w/Bearings
Item Number: 1-5079
Price: $5.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 178 of our current catalog
New take-offs, black steel rim with dual ball bearings for 8" tires. 1-3/4" offset.

  • Wheel Rim Size 8" dia. x 5.5"
  • O.D. 8-7/8"
  • Width 6-5/16"
  • Bearings Ball
  • Bore 3/4"
  • Hub thru length 3-1/16"
  • Pilot Opening 2-3/4" dia.  
  • Hub type Offset
  • Shpg. 8 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 20

how do you grease the bearings on this wheel

A: The wheel bearings are not serviceable.

" 3/4" Bore w/Bearings " Is the bearing id 3/4" or is the hub id 3/4"?

A: The ID of the bearing is 3/4".

Would the 8-5.5 rim work for a nanco 21 x12x8 N800 tire. If not can you recommend one that would work for that tire?

A: No this will not work with that tire. We do not have a rim for that size.

Under specifications for this item, what is the 'Pilot Opening' that is listed as 2-3/4 inches? Is this the ID of the hub itself (i.e., OD of the bearing assy.)? The only other opening that occurs to me is the one for the valve stem which should be about 0.453". Thanks.

A: The pilot opening is where the tube sits.

Will this rim work for a 16X7.50-8 tire?

A: No this rim will not fit that size.

What is the weight limitation for this wheel?

A: Unfortunately, we do not have that information.

will a 6.50 x 16 x 8 fit

A: The bead may not seat properly with that size difference.

could this wheel be used at highway speeds for a small trailer ITEM NUMBER: 1-5079

A: No. These rims were not intended for highway use. They were meant for no more than 17 mph in an off-road application.

What size of tire fits on this rim

A: These were originally for 18x8.5-8 tires.

Is this rim tubeless or does a tube need to be used?

A: In the original application this was tubeless, but could be utilized in either fashion.

Does the wheel 1-5079 have a grease zerk on the back to grease spindle

A: No, it does not.

Do you have tires to fit these?

A: Our item 1-5032 would fit on them.

Is the ID fit for a 1 inch shaft? IF not can a bearing to fit a 1 inch OD shaft fit in to this wheel ?

A: We have not disassembled one of these to determine the diameter of the bearing seat. The existing bearings are for a 3/4" shaft.

Are these wheels compatible with a Honda Ht3810 lawn tractor?

A: We have no information regarding that model to make that determination.

Will the spindles you sell fit these rims

A: No, the only spindles we have are for 1" bearings.

Will a 16x6.5-8 tire on tire fit on these rims? Can these be used as tubeless or do they need tubes?

A: These rims originally had 18x8.5-8 tubeless tires on them. The smaller tire will expand to meet the bead, and may not seat on it properly. To be used tubeless, a valve stem would need to be installed.

Would a 18× 8.5-8 tire fit this rim?

A: Yes, it would.

What is the hub offset

A: From the outer lip of the rim to the hub on the inner side is .950", and from the outer lip of the rim to the hub on the outer side (with the valve stem hole) is 2.55".

Are these rims highway rated?

A: These are not highway rated. They were originally for a UTV/lawn mower.

Is this rim highway rated?

A: It is not, no. It was originally for a UTV/lawn mower.

Recently Viewed
Email a Friend
8"x5.5" Steel Wheel Rim 3/4" Bore w/Bearings
Item Number: 1-5079
Price: $5.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

8"x5.5" Steel Wheel Rim 3/4" Bore w/Bearings
Additional Comments:

Please wait...
Newsletter SignUp