3.25x12x1.25 DA Prince PMS-AM-2570 Hydraulic Rephasing Cylinder

   Returned Item:  This cylinder has marks on the tie-rod bolts and is missing a pin.  Sold as is. 

PRINCE REPHASING CYLINDER
PRINCE rephasing cylinders for series applications where multiple cylinders extend and retract equally. Two or more cylinders are plumbed in series, with bore and rod diameters sized so all rods extend or retract in unison. The rephase bypass allows oil to bypass piston on full cylinder extension to fill the next cylinder during initial synchronization or to compensate for internal leakage.

Not to be used as single cylinder at full pressure due to column buckling!

SPECIFICATIONS

Model # PMS-AM-2570 Bore x Stroke 3-1/4" x 12" Pressure 3000 PSI Rod Diam. 1-1/4"

Ports SAE 8 Retracted Length 24-1/4" Shpg. 42 lbs.

END MOUNTINGS
Rod End Clevis Inside Width 1-1/16" Outside Width 2-1/2" Throat Depth 1-13/16" Pin Diam. 1"	Base End Clevis Inside Width 1-1/16" Outside Width 2-3/8" Throat Depth 1-7/8" Pin Diam. 1"