Hydraforce Manual Directional Control Valve Cartridge Valve MR10-20C-0-N

HYDRAFORCE MANUAL DIRECTIONAL CONTROL VALVE MR10-20C-0-N

New, Hydraforce. A manually-adjustable variable orifice, offering linear control with adaptability to a variety of adjustment operators (ordered separately).
In extreme clockwise position, the MR10-20 is fully closed (normally closed). Counterclockwise rotation of 180� gradually increases flow. The first 10� (approx.) of rotation is deadband. The last 15� of rotation increases flow very little. For a normally-open version with counterclockwise rotation gradually decreasing flow, consult factory. NOTE: Use of the valve in the 1 to 2 direction is not recommended if the plastic knob operator is used. Because of the low effort (internal bearing used) adjustment, flow forces may cause setting change. The valve will operate 1 to 2 well with handle-type operator kits.

SPECIFICATIONS

• Brand HydraForce
• Model MR10-20C-0-N
• Type Manual Rotary Flow Control
• Pressure Rating 3500 PSI max.
• Pressure Setting None
• Flow 6 GPM max.
• Fits into VC10-2 Cavity
• Features 6 GPM flow rate, Cartridge Only
• Overall Size 3-3/8" x 1-11/16" dia.
• Shpg. 1/2 lb.