2.65 HP TREADMILL MOTOR New, Icon Health and Fitness model# F-175667 permanent magnet motor with brushes. Built for use in treadmills, ideal for use with speed controller (sold separately). Would also make an excellent DC generator. Rated for 2.65 HP (1977W) treadmill duty or 1.5 HP (1119W) continuous duty. Internal, normally closed bimetallic switch signals thermal overload.
Requires external source of air-flow over motor for prolonged use. Pivot mount measures 4-1/8" long overall with 3-7/8" between flanges. Bracket has two 3/8" holes. Motor is reversible. Left-hand threaded end of shaft requires clockwise rotation.
Power 2.65 HP (1977W) Treadmill
1.5 HP (1119W) Continuous
Voltage 130 VDC Treadmill
95 VDC Continuous
Amperage 15.2 Amps Treadmill
11.8 Amps Continuous
RPM 9175 RPM @ 130 VDC, No Load
6560 RPM @ 95 VDC, No Load
Mount Pivot Mount with Two 3/8" Holes, See Paragraph
Shaft 17mm dia. x 43mm overall length w/ 1/2"-13 x 14mm long LH threaded end
Rear Shaft 10mm dia. x 20mm overall length, Stepped down to 8mm for 7mm
Size 7-7/8" x 3-1/4" case dia., Front flange measures 4-1/2" dia. x 1/16" thick