7.87" Stroke 110 lbs 12 Volt DC Linear Actuator w/Sensor

Compatible with Controller

Item Number: 5-1577-8

Price: $112.70
TOP
Back to top

7.87" Stroke 110 lbs 12 Volt DC Linear Actuator w/Sensor

7.87" Stroke 110 lbs 12 Volt DC Linear Actuator w/Sensor

item number: 5-1577-8 PRICE: $112.70 9 In Stock Regular Stock Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 5-1577-8
7.87" Stroke 110 lbs 12 Volt DC Linear Actuator w/Sensor
Item Number: 5-1577-8
Price: $112.70
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 162 of our current catalog
Description
12 VDC 110 LB. LINEAR ACTUATOR
Brand new, GLIDEFORCE model LACT8P light duty linear actuator. Built-in potentiometer allows for use with position-sensing circuits. Metal housing is water resistant and sealed against dust. Permanent magnet motor. Non-adjustable limit switches at end of stroke both directions.

SPECIFICATIONS
  • Stroke 200 mm (7.87")
  • Voltage 12 DC
  • Push/Pull Rating
      Dynamic 110 lbs. max
  • Extension Speed
      No Load 0.57 in/sec
      Max Load 0.48 in/sec
  • Amps
      No Load 1.2
      Full Load 3.2
  • Gear Ratio  20:1
  • Duty 25%
  • Operational Temperature Range
       -14° F to +149° F
  • Enclosure IP65
  • Pin Holes 1/4"
  • Retracted Length 348 mm (13.70")
  • Shaft Dia. 20 mm (0.787")
  • Size 14-1/4" x 1-1/2" x 3"
  • Shpg. 5 lbs.
  • More Specs
    Click on boxes below for more information about this product.
    Wiring DiagramMore SpecsAdditional InformationMore Specs
    Ask A Question
    Submit a question for this product

    Showing Questions of 2

    What is the positional accuracy of this actuator? Is this actuator capable of receiving a contact closure? Is this actuator able to be controlled/programmed with an external controller

    A: Item 5-1577-C is the manufacturers external control unit developed for use with this actuator. These units use potentiometer rotation values to determine and repeat position when used with the control board. While there isn't any published accuracy data, in applications customers have reported high reliability and repeatability of positioning when used with the manufacturer's control board.

    Will this adapt (fit within) to a 1998 25 hp, 2 stroke Johnson Outboard Motor?

    A: We could not say. That would be your determination to make based on observation and measurements. This is a general purpose actuator with no definite purpose intended other than moving the stated load the stated travel.

    Recently Viewed
    Email a Friend
    7.87" Stroke 110 lbs 12 Volt DC Linear Actuator w/Sensor
    Item Number: 5-1577-8
    Price: $112.70
    Message for your friend:

    I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

    7.87" Stroke 110 lbs 12 Volt DC Linear Actuator w/Sensor
    Additional Comments:

    Please wait...
    Newsletter SignUp