3x15x1.5 Double Acting Hydraulic Cylinder 71145 T00706-C-3

Item Number: 9-9556

Price: $119.95
Back to top

3x15x1.5 Double Acting Hydraulic Cylinder 71145 T00706-C-3

3x15x1.5 Double Acting Hydraulic Cylinder 71145 T00706-C-3

item number: 9-9556 PRICE: $119.95 2 In Stock Surplus Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-9556
3x15x1.5 Double Acting Hydraulic Cylinder 71145 T00706-C-3
Item Number: 9-9556
Price: $119.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
New welded cylinder with thread-in gland cap. Cartridge block features three SAE 6 ports and two SUN model RDDA-LAN direct acting relief valves with 25 GPM capacity and 3000 PSI setting. "71145 T00706-C-3" stamped into cylinder barrel. Single port for relief valves for low pressure return.

  • Double Acting
  • Bore x Stroke 3" x 15"
  • Barrel Thickness 1/4"
  • Pressure 3000 PSI max.
  • Rod Dia. 1-1/2"
  • Ports SAE 6
  • Relief Port SAE 6
  • Retracted Length 23"
  • Shpg. 45 lbs.
  • Rod End Crosstube
  • Width 8"
  • O.D. 2-1/4"
  • Pin Hole 1-1/4"
  • Base End Crosstube
  • Width 6"
  • O.D. 2-1/4"
  • Pin Hole 1-1/4"
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 3

Are repair kits available for this unit. Also can it be used as regular cylinder without release hook up??

A: We do not have or have access to any seal kits for this, if they do exist. Also, we cannot recommend bypassing any existing plumbing.

What does the Cartridge block SUN model RDDA-LAN direct acting relief valve do. I am wanting to use this as a stabilize cylinder for a backhoe will it work for that purpose.

A: The relief valve cartridges protect each side of the cylinder from excessive pressure. The exhaust ports of the relief valves are common to each other, and the third port must be connected to a low-pressure tank line for them to operate correctly. If the port is not connected, the relief cartridges will not function, and a system relief valve would have to protect the cylinder. It would still operate as a cylinder in either case.

Is the retracted length from pin center line to pin center line? If not I am in need of a cylinder that is 22" retracted from pin center to center with a stroke close to 13" with cross tubes on each side with 1 1/4" ID and preferably a 1 1/2" rod and 3" bore.

A: Yes, we determine retracted length from center pin to center pin.

Recently Viewed
Email a Friend
3x15x1.5 Double Acting Hydraulic Cylinder 71145 T00706-C-3
Item Number: 9-9556
Price: $119.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3x15x1.5 Double Acting Hydraulic Cylinder 71145 T00706-C-3
Additional Comments:

Please wait...
Newsletter SignUp