4" x 57" x 2.75" DA HYDRAULIC CYLINDER
Unused, old inventory. Welded cylinder with thread-in gland cap. Two machined grooves cut into barrel exterior measuring 4-3/4" wide overall. One groove begins 6-5/8" from base end and other begins 12-5/8" from base end, both have main 4" groove between two smaller 3/8" grooves. Main groove has 1/4" depth and smaller grooves have 1/8" depth. Two extend ports in base. Retracted length measured end to end.
SPECIFICATIONS
|
- Double Acting
- Bore x Stroke 4" x 57"
- Barrel Thickness 1/2"
- Pressure 3000 PSI max.
- Rod Dia. 2-3/4"
|
- Ports SAE 8
- Retracted Length 67-3/16"
- Shpg. 310 lbs.
|
END MOUNTINGS |
|
- Rod End Thru-Hole
- Width 2-3/4"
- Pin Center to Rod End 1-7/16"
- Pin Hole 11/16"
|
- Two Machined Grooves
- Overall Groove Width 4-3/4" Each
|