6.5" x 71" x 4" DA HYDRAULIC CYLINDER
Unused, old inventory. Welded cylinder with external bolt-on gland cap. Cylinder is double ported at end of extend stroke to provide cushion, first port has two 1/4" I.D. holes to redirect fluid to retract cycle. Superficial rust and chipped paint. "P/N U288G1905" stamped into cylinder barrel.
SPECIFICATIONS
|
- Double Acting
- Bore x Stroke 6-1/2" x 71"
- Barrel Thickness 1/2"
- Pressure 3000 PSI max.
- Rod Dia. 4"
|
- Ports SAE 16 and 1-1/4" Four-Bolt Flange, Code 61
- Retracted Length 97-3/4"
- Shpg. 850 lbs.
|
END MOUNTINGS |
|
- Rod End Tang w/ Swivel Eye
- Max Thickness 3"
- Pin Center to Tang End 3-3/16"
- Pin Hole 2-3/4"
|
- Base End Tang w/ Swivel Eye
- Max Thickness 3-1/8"
- Pin Center to Tang End 3-3/16"
- Pin Hole 2-3/4"
|