2.75x8x1.125 DA Hydraulic Rephasing Cylinder Lion 27TP08-112 ASAE

Item Number: 9-8734

Price: $90.95
TOP
Back to top

2.75x8x1.125 DA Hydraulic Rephasing Cylinder Lion 27TP08-112 ASAE

2.75x8x1.125 DA Hydraulic Rephasing Cylinder Lion 27TP08-112 ASAE

item number: 9-8734 PRICE: $90.95 49 In Stock Surplus Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-8734
2.75x8x1.125 DA Hydraulic Rephasing Cylinder Lion 27TP08-112 ASAE
Item Number: 9-8734
Price: $90.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 64 of our current catalog
Description
2.75X8X1.125 DA HYDRAULIC CYLINDER LION 27TP08-112 ASAE
New, Lion Hydraulics TP 3000 series rephasing, tie-rod cylinder. Ships with two sets of pins and cotters.

SPECIFICATIONS
  • Model Number 27TP08-112 ASAE
  • Type Double-Acting, Rephasing
  • Bore x Stroke 2-3/4'' x 8''
  • Pressure 3000 PSI max.
  • Rod Dia. 1-1/8''
  • Column Load Full PSI @ full extension
  • Ports SAE 8
  • Retracted Length 20-1/4''
  • Shpg. 27 lbs.
END MOUNTINGS
  • Rod End Clevis
  • Rod Outside Width 2-1/2''
  • Rod Inside Width 1-1/8''
  • Rod Throat Depth 2-1/8''
  • Rod Pin Hole 1''
  • Base End Clevis
  • Base Outside Width 2-9/16''
  • Base Inside Width 1-1/8''
  • Base Throat Depth 2-1/16''
  • Base Pin Hole 1''
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 1

What is a rephasing hydraulic cylinder?

A: The rephasing cylinders we sell are the 'series' type cylinders commonly found on agricultural equipment. Beginning with the largest, or 'master' cylinder the bore and rod sizes decrease incrementally down the 'slave' cylinders in the series so that the exhaust volume of the rod side of the cylinder which is plumbed to the extend side of the next smallest closely equals the extend volume needed. This creates a smooth, synchronized stroke across a long bar without the need for rotary flow dividers. There is a bypass port on at the extend limit of the stroke to allow any bypass or make-up volume to flow through.

Recently Viewed
Email a Friend
2.75x8x1.125 DA Hydraulic Rephasing Cylinder Lion 27TP08-112 ASAE
Item Number: 9-8734
Price: $90.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

2.75x8x1.125 DA Hydraulic Rephasing Cylinder Lion 27TP08-112 ASAE
Additional Comments:

Please wait...
Newsletter SignUp