3.5" x 68.5" x 3.5" SA DISPLACEMENT HYDRAULIC CYLINDER
Unused, old inventory. Welded, displacement-type cylinder with thread-in gland cap. Rod end cross block has eight 3/8"-16 x 3" long bolts holding block halves together around pin sleeves.
Cylinder seals cracked and hard from storage, cylinder may need to be resealed before use.
SPECIFICATIONS
|
- Single Acting
- Bore x Stroke 3-1/2" x 68-1/2"
- Barrel Thickness 5/16"
- Pressure 3000 PSI max.
- Rod Dia. 3-1/2", Hollow
- Rod Thickness 1/4"
|
- Cylinder Tube I.D. 4"
- Port 3/8" dia. hole w/ three offset 5/16"-24 x 3/4" deep tapped holes
- Retracted Length 46-1/2"
- Shpg. 270 lbs.
|
END MOUNTINGS |
|
- Rod End Cross Block
- Width 8-7/8"
- Dimensions 3-1/2" x 3"
- Pin Hole 2"
|
- Trunnion Female
- Pin Outside Width 9-3/4"
- Pin Inside Width 5-1/4"
- Pin Center to Rod Pin Center 46-1/2"
- Pin Center to Base End 30-1/2"
- Pin Diameter 2"
|