Can you tell me the length between the filter housing mounting holes? Thanks
A: The length from mount hole to mount hole is 1-1/2".
Date Submitted: 12/10/2019
can this filter be used with a 13 gpm 2 stage hydraulic pump
A: No this will not it can only handle 9 GPM max.
Date Submitted: 05/23/2019
Is the head of this unit the same head that is used on the 3/4" return line filter.
Date Submitted: 02/21/2019
Will thie Zinga 3/4" NPT 9 GPM FA1100-25 Suction Filter work with the Surplus Center Item Number: 9-0776 GPM 12 Volt DC SCC Waste Oil Transfer Pump. I want to filter hydraulic fluid with this pump and would like to install a particle filter in suction line before going into the reservoir. Are there any other filters better for this?
A: While this pump has enough suction to be self-priming up to ten feet of lift with water, there is no clear data to determine if there would be enough suction when used with oil to pull through a suction filter.
Date Submitted: 12/08/2017
what is the filter thread?
A: The filter thread is 1"-12 thread.
Date Submitted: 04/01/2017
Does this have to be mounted vertically as pictured?
A: It can be mounted in any orientation. It's less messy to change if mounted vertically, but it doesn't have to be that way.
Date Submitted: 05/03/2016
What is the bypass cracking point of the filter head?