13 GPM MTE 2 Stage Hydraulic Log Splitter Pump

Item Number: 9-12446

Price: $119.95
Back to top

13 GPM MTE 2 Stage Hydraulic Log Splitter Pump

13 GPM MTE 2 Stage Hydraulic Log Splitter Pump

item number: 9-12446 PRICE: $119.95 Out of Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-12446
13 GPM MTE 2 Stage Hydraulic Log Splitter Pump
Item Number: 9-12446
Price: $119.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
New, MTE HYDRAULICS two stage HI/LO pressure hydraulic gear pump. Ideal for applications such as log splitters, presses and other equipment where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. The change from LO to HI pressure is automatic with the LO stage pressure preset at 500 PSI. Minimum of 6.5 HP required for gas engine use.

  • Displacement:
      0.192 cu. in. / rev. HI press. stage
      0.839 cu. in. / rev. LO press. stage
  • Pump Type Gear
  • Rotation CW
  • Orientation Horizontal or Vertical
  • Pressure: 3000 PSI max.
  • Speed: 3800 RPM max.
  • Flow:
      3 GPM HI press. stage
      13 GPM LO press. stage
  • Unloading Pressure 500 PSI
  • Mount 4 bolt USA 4F17
  • Shaft 1/2" dia. x 1-1/2" long keyed
  • Rqd. Filtration 25 micron
  • Inlet Port 1" Hosebarb
  • Outlet Port SAE 8
  • Size 6-1/4" x 4" x 3-11/16"
  • Shpg. 12 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 3

Is there a manual available for this pump model? If so can I get it sent to me?

A: Unfortunately we do not have a manual available.

Is the unloading pressure adjustable on this pump? If so what is the range?

A: The unloading pressure of this pump is not adjustable.

Can you apply side load?

A: No, this pump is direct drive only

Recently Viewed
Email a Friend
13 GPM MTE 2 Stage Hydraulic Log Splitter Pump
Item Number: 9-12446
Price: $119.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

13 GPM MTE 2 Stage Hydraulic Log Splitter Pump
Additional Comments:

Please wait...
Newsletter SignUp