Prince Double Pump CW Splined (Custom)

CUSTOM PRINCE DOUBLE PUMP
Brand new Prince aluminum double pump. Select the displacements your application requires for both front and rear sections. Each section has it''s own inlet and outlet ports. The front sections have side ports and rear sections can have either side or rear ports. Performance for each section is listed in charts below.

Pump should be operated within the parameters of the following equation:
      PF x DF + PR x DR < 13200.
PF is operating pressure of front section,DF is displacement of front section
PR is operating pressure of rear section,DR is displacement of rear section
Example: front pump 3.179 cu. in. at 2500 psi, rear pump 1.22 cu. in. at 1800 psi
3.179 x 2500 + 1.22 x 1800=10143 This is under 13200 so combination is fine.

SPECIFICATIONS
•CW rotation
•7/8-13 splined shaft
•SAE B 2 bolt mount
•Pump length varies from 10" to 12 1/2" depending on displacemnt
•Max 3000 RPM
•Shpg 25 lbs

Front Section Specifications

Displacement	Inlet Port	Outlet port	GPM @ 2000 RPM	PSI
1.141	SAE 16	SAE 12	9.8	3000
1.349	SAE 16	SAE 12	11.7	3000
1.66	SAE 16	SAE 12	14.3	3000
2.008	SAE 20	SAE 16	17.4	3000
2.318	SAE 20	SAE 16	20	3000
2.697	SAE 20	SAE 16	23.4	3000
3.179	SAE 20	SAE 16	27.5	2500
3.869	SAE 24	SAE 16	33.5	2500

Rear Section Specifications

Displacement	Side Inlet	Side Outlet	Rear Inlet	Rear Outlet	GPM @ 2000 RPM	PSI
0.499	SAE 12	SAE 10	SAE 16	SAE 12	4.04	3000
0.589	SAE 12	SAE 10	SAE 16	SAE 12	4.75	3000
0.677	SAE 12	SAE 10	SAE 16	SAE 12	5.63	3000
0.86	SAE 12	SAE 10	SAE 16	SAE 12	7.01	3000
0.976	SAE 12	SAE 10	SAE 16	SAE 12	7.93	3000
1.22	SAE 16	SAE 12	SAE 16	SAE 12	10.05	3000
1.403	SAE 16	SAE 12	SAE 16	SAE 12	11.6	2500
1.654	SAE 16	SAE 12	SAE 16	SAE 12	13.9	2500