3 Spool Prince SV Sectional Control Valve Closed Center No Relief

Item Number: 9SV-3-Z

Price: $0.00
TOP
Back to top

3 Spool Prince SV Sectional Control Valve Closed Center No Relief

3 Spool Prince SV Sectional Control Valve Closed Center No Relief

item number: 9SV-3-Z PRICE: Regular Stock Item

Includes: Qty:
SVE23 Prince SV SAE 10 Closed Center Outlet Section$49.70 1
SVI21 Prince SV SAE 10 Inlet Section$47.10 1
3 Work Section Prince SV 660401003 Tie Rod Bolt Kit$16.95 1
SELECT THE TYPE OF SPOOL REQUIRED:
SELECT THE TYPE OF SPOOL REQUIRED:
SELECT THE TYPE OF SPOOL REQUIRED:


Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9SV-3-Z
3 Spool Prince SV Sectional Control Valve Closed Center No Relief
Item Number: 9SV-3-Z
Price: $0.00
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
Description
BUILD YOUR OWN PRINCE SV CONTROL VALVE
Brand new Prince SV hydraulic control valves. Choose the spool types required for your application from the drop down boxes below. Furnished with handles, bolt kit and all o-rings to seal between sections. Inlet and Outlet sections have dual ports for either top or side plumbing. Sectional design lets you get the exact valve components and configuration required for your application. Each section has load checks.

Specifications for Z valves
  • Flow 12 GPM (nominal) to 16 GPM maximum
  • Pressure 3000 PSI maximum
  • Closed Center
  • Inlet and Outlet Ports SAE 10
  • Work Ports SAE 8
More Specs Ask A Question
Submit a question for this product

Showing Questions of 2

Is this valve available with the third section having a 12V electrical control. I want to build a loader valve but want to use the remote joystick that you sell with the spst switch built into the handle and couple that witht the remote cables and a 12V solenoid valve for the 3rd position. I would want DA spring centered with detent float valve 1 DA spring centered no detent valve 2 DA 12V electric valve 3.

A: Please call our product support staff 800-488-3407 so we may better assist you.

I'm replacing the hydraulic (3 valve stack) at the bucket, on an Asplundh bucket truck. not sure if it is closed center or open center. Any suggestions, as to determine which it is? Thanks Paul 717- 269-2697

A: If fluid is continuously circulating through the valve at low pressure, then it's very likely an open center system. If the fluid doesn't circulate, but deadheads in the valve and maintains the system pressure until a spool is operated, it would be a closed center system.

Recently Viewed
Email a Friend
3 Spool Prince SV Sectional Control Valve Closed Center No Relief
Item Number: 9SV-3-Z
Price: $0.00
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3 Spool Prince SV Sectional Control Valve Closed Center No Relief
Additional Comments:

Please wait...
Newsletter SignUp