12 VDC HYDRAULIC SOLENOID VALVE Brand new, EATON-VICKERS DG4V-3 series, double-solenoid control valve. Spring centering spool. Manual override on solenoids. Subplate mounting requires D03 subplate (sold separately) for port connections. Use with two Hirschmann connectors (sold separately) for wiring.
If using valve 9-6137 open center (all ports open to tank in neutral) motor spool valve, and subplate 9-5883-1, to operate a hydraulic motor on a cutter at max rpm of 1091, would I need a 9-8745 hyd motor relief bypass valve? Would all ports open to tank in neutral, serve as the motor wind down? Would the valve 9-6137 not work on controlling hydraulic cylinders?
A: With the work ports open to each other in neutral, this valve would allow a motor to coast to a stop. This would not allow for any relief unless provided by another portion of the system.
Date Submitted: 03/05/2017
subplate 9-5883-1 with 9-6137 valve, will this work in a power beyond system
A: If it is the last valve in the stream, and the system flow doesn't exceed the flow rate of the block/valve, it could.
Date Submitted: 02/20/2017
What type and size are the hose fittings for this valve?
A: This valve does not have threaded ports. It is mounted onto a subplate which is where the hose connections are made.