7/8" 13T Splined Coupling G & G Mfg 163-1413

Item Number: 1-1392

Price: $8.15
TOP
Back to top

7/8" 13T Splined Coupling G & G Mfg 163-1413

7/8" 13T Splined Coupling G & G Mfg 163-1413

item number: 1-1392 PRICE: $8.15 999 In Stock Regular Stock Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 1-1392
7/8" 13T Splined Coupling G & G Mfg 163-1413
Item Number: 1-1392
Price: $8.15
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 140 of our current catalog
Description
Spline Shaft Coupler
Brand new spline shaft coupler for hydraulic pumps, gearboxes, etc.

SPECIFICATIONS
  • Made from cold rolled steel
  • Machinable and weldable
  • 7/8" 13 Tooth spline
  • 1-1/2" OD x 2-1/4"
  • Shpg. 2 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 14

Do you sell fuily-splined shaft stock in the same size (13T x 7/8") as this coupling?

A: No, we do not sell fully splined shaft in 7/8" 13T.

I purchased two splined couplers 7/8" 13T Splined Coupling 163-1413 ITEM NUMBER: 1-1392. Unfortunately we need the same part but have the spline only have the length of the part and the other end blank so it can be bored and threaded to an 18 mm, 1.5 pitch. Do you have or does your supplier make the same size coupler with the spline going only 1/2 way through the part? thanks Dave Hardman

A: No we do not have a solid coupler that is only half splined.

Wher is the 7/8 dimension taken from?

A: This coupling will fit on a 7/8" 13 spline shaft.

Do you have a 50-15 sprocket that will fit this?

A: We do carry a #50 pitch chain 15 tooth sprocket with a 1.5" bore. This could be inserted into the bore and welded to make it work.

Hi there I'm looking for a 13 to splined coupling 7/8 and diameter ID but I needed to be roughly four in long is this something you could help me with?

A: We do not have access to a coupler that long.

I am looking for a similar coupling. I need a 13/16 by 23 tooth internal splined coupling with a smooth cylindrical outside diameter? Can you help me? Thanks

A: We do not have a splined coupler like that.

Do you sell shaft that will fit this coupler

A: No, we do not.

do you carry any 7/8" 13t splined shafting?

A: No, we do not.

Do the splines go completely through coupler

A: Yes, the coupler is splined the full length of the bore.

I am looking for an adaptor to go over an 1-1/8" shaft to a 1-1/8 13 tooth spline.

A: We have no such adapter, unfortunately. That may be a non-standard size/spline.

The coupler I need to replace is 3 in in length. the one listed is 2 1/4 in Do you have a 3 in coupler?

A: We do not.

Where do you measure the coupling to obtain the 7/8 diameter? Rhanks

A: The 7/8" is the outside diameter of the splined shaft that this would couple to.

Do you have the shaft ? I need one 21 7/8 " long . 7/8 shaft 13 spline . Thanks Gene

A: Sorry we do not have any 7/8-13 splined shafting.

I been searching through the website but could find the size do you guys have a 7/8 with 13t and an od of 2" I will appreciate your time

A: Sorry this is the only size of coupler we have for a 13 tooth 7/8 dia. shaft.

Recently Viewed
Email a Friend
7/8" 13T Splined Coupling G & G Mfg 163-1413
Item Number: 1-1392
Price: $8.15
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

7/8" 13T Splined Coupling G & G Mfg 163-1413
Additional Comments:

Please wait...
Newsletter SignUp