Hydro Gear Hydrostatic Transaxle

Item Number: 13-1576

Price: $269.95
TOP
Back to top

Hydro Gear Hydrostatic Transaxle

Hydro Gear Hydrostatic Transaxle

item number: 13-1576 PRICE: $269.95 Out of Stock - No Longer Available
Calculate Shipping for Item 13-1576
Hydro Gear Hydrostatic Transaxle
Item Number: 13-1576
Price: $269.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
Description
HYDROSTATIC TRANSAXLE

New HYDRO-GEAR model T2-CDBE-5X1A-18C1. Hydrostatic transaxle for variable speed equipment. Ideal for lawn tractor replacement or for building vehicles. Single lever for speed and directional control. Vertical input shaft for belt drive. Cooling fan on top of unit.
SPECIFICATIONS
  • Input speed 1800-3000 RPM
  • Max output approx 120 rpm
  • Gear Reduction 25.42:1
  • Output Torque
    145 ft.lbs. continous
    285 ft.lbs. intermittent
  • Max axle wt. 540 lbs.
  • Input rotation CW
  • Max tire size 18"
  • Oil capacity 122 oz.
  • Recommended oil 20W-50 motor oil
  • Input Pulley 4" dia.
  • Axles 3/4" diam. x 5" long 
  • Overall width 29"
  • Dual 4 bolt mtg. patterns
    2-1/2" x 16-1/4"
    1-3/4" x 12-3/4"
  • Overall Size 29" x 11" x 9"
  • Shpg. 38 lbs.
Ask A Question

Showing Questions of 29

Does this come with documentation such as installation and maintenance docs?

A: No, they do not. These were unused OEM units which came to us in bulk with no papers to send out.

What is the dimension from the center of the pulley to the center of the axle?

A: It is approximately 3.9" from the centerline of the pulley to the axle centerline on the horizontal plane of each.

Will this axle fit a craftsman YT 4500 mower

A: We have no information regarding what this unit will fit, replace, or cross reference to.

Can a horizontal engine be used with the transmission rotated 90 degrees?

A: No. The internal plumbing would not allow that orientation.

If the item, does not fit my application and it unused can it be returned and refunded?

A: Returning Merchandise If you receive a product from us and are not satisfied or the item is not suitable for your application, you can return it within 30 Days, as long as the item has not been installed or modified and it is in the original manufacturers condition. A refund will be issued for the cost of the item only. All returns must be shipped back PREPAID with all original parts, manuals and accessories. We do not accept COD shipments. If a product is defective within the warranty period please contact us immediately so we may assist you. All returns must have a Return Authorization number written on the box. To obtain an authorization and shipping instructions call 1-800-488-3407 or email customerservice@surpluscenter.com

Can the Hydro Gear Hydrostatic Transaxle ITEM NUMBER: 13-1576 be used as a replacement for a MST - 206-545C Transaxle?

A: A: A: We have no information regarding what units this will replace or cross to. Date Submitted: 05/22/2017 Date Submitted: 06/12/2018

Is the transaxle for a John deer 38 in cut

A: We have no information regarding what this will fit or replace.

Will this hydro possibly work in my sltx1054

A: We have no information on what may fit that equipment and cannot say. You may make that determination after checking mounting patterns, drive and linkage connection methods, and axle size among other things.

will this replace the Tuff Torq K46?

A: A: We have no information regarding what units this will replace or cross to. Date Submitted: 05/22/2017

this isn't a question, but it is an answer to all the questions before. My research says this is the same as a T2-HP from hydro-gear website (google it). The transaxle reduction ratio numbers match as do the rest of the technical information provided. I am using this to replace an axle on my Husqvarna lawn tractor.

A: .

Is this a posi (locked) rear axle or limited slip?

A: This is a hydrostatic transaxle, and the output is most similar to that of a geared differential transaxle.

My current transaxle is a T2 AABC 1X1A 1GX1, is this its replacement. Thanks

A: We do not have model coding information for these transaxles and cannot say if they are compatible.

will this replace a Hydro Gear 331-3000

A: We have no information regarding what this will fit or replace.

Will this transaxle work on craftsman 26 HP lawn tractor?

A: With no other information, it's impossible to say.

Is there differential action? If one side is slowed or braked, will the power go to the other wheel ?

A: This is a hydrostatic transaxle, and the output is most similar to that of a geared differential transaxle.

There appears to be a gray plastic tank on the transmission. Is this an oil reservoir and what of the yellow disc? Is the yellow disc actually a plug that can be pried off to add oil? Is the hydro trans shipped "dry"?

A: The gray tank is the expansion reservoir for the transmission. There is a fill port on the top side of the transmission itself, not on the tank. The yellow disc is simply a sticker. They ship filled with oil.

What is the model number of the hydro gear transmission

A: HYDRO-GEAR model T2-CDBE-5X1A-18C1

Not a question but may help others. Just installed this transaxle in my Sears 16HP 42" lawn tractor with a few modifications. First the forward/reverse lever moves in the opposite direction so had to flip the cross shaft so the actuating arm was on the back side. Then had to make another cross shaft to connect to the disk brake. Lastly had to make a hole between the seat and floor to install a linkage to allow for the tow mode. Now uses an 88" belt. Works great!

A:

Is the image shown the actual part that is being sold ??

A: Yes.

Judging by the Axle length (both) and the Bearing seal retainer clips, I am assuming that this one is designed for 2 Outboard Disc brake assys. Am I right ??

A: We have no information regarding the original application, or configuration of the drive output.

Will this replace a tuff-torque K-46?

A: We have no information regarding what units this will replace or cross to.

What size is the key way on the axles? I see it says 3/4" diameter but no key way size. Thanks

A: The keyways are 3/16".

Will item#13-1576 hydro gear replace a john deere trans axle part #AM134125? Thanks for the help.

A: We have no information regarding what this unit was made for or what it will replace.

will the New HYDRO-GEAR model T2-CDBE-5X1A-18C1 replace the earlier model 314-0510 Hydro Gear Transaxle? Same mount pattern and controls?

A: We have no information regarding what this unit was made for or what it will replace.

What is the approximate distance from the top of the mounting pads to the center-line of the drive pulley?

A: It is roughly 3-1/8" from the mounting pad to the drive pulley centerline.

Would item #13-1576 hydro gear hydrostatic transaxle replace a tuff torque k57A?

A: We have no information to say that it will or won't.

Are the axles keyed and use a snap ring ?

A: The axles are keyed, and do have grooves for snap rings.

Is there any place to put brakes on it.

A: No, there does not appear to be any provision for a mechanical brake.

I see that is I a single lever control, can you vary the speed of each wheel to enable turning or is it just forward/reverse and you cannot control each side of the axle independently?

A: You cannot vary from each axle independently. The single lever only controls speed and forward/reverse for both axles together.

Recently Viewed
Email a Friend
Hydro Gear Hydrostatic Transaxle
Item Number: 13-1576
Price: $269.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

Hydro Gear Hydrostatic Transaxle
Additional Comments:

Please wait...
Newsletter SignUp