3" Trash Pump Head with Strainer

Item Number: 2-1438

Price: $119.95
Back to top

3" Trash Pump Head with Strainer

3" Trash Pump Head with Strainer

item number: 2-1438 PRICE: $119.95 1 In Stock Surplus Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 2-1438
3" Trash Pump Head with Strainer
Item Number: 2-1438
Price: $119.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.

You may also consider:

New, HYPRO 3" aluminum trash pump head. Simply add your own 6.5 HP engine with 3/4" keyed crankshaft. Removeable front cover allows easy cleanout. Cast iron volute and impellor for long life. Will handle solids up to 1" dia. Includes intake strainer with hose barb connector. EPDM mechanical shaft seal and inlet valve to retain prime after initial setup.

  • HP Required 6.5 minimum
  • Ports 3" NPT
  • Input Shaft Required 3/4" dia. keyed
  • Max. head 106 ft.(46 PSI)
  • Max. suction lift 23 ft.
  • Mtg pattern to engine 4 holes on 3-5/8" bolt circle
    furnished with 5/16-24 bolts
  • Base mount Slotted 9-1/2" c/c
  • Size 12" x 10" x 13"
  • Shpg. 40 lbs.

Flow Rate @ Ft. of head (PSI)
Flow Rate Ft of Head (PSI)
  272 GPM   @ 12 Ft. (5 PSI)
  179 GPM   @ 58 Ft. (25 PSI)
  50 GPM   @ 93 Ft. (40 PSI)

Prop 65 Warning WARNING: Cancer and Reproductive Harm

More Specs
Click on boxes below for more information about this product.
InstructionsMore Specs
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 8

Do you have suitable hydraulic motors that will direct mount to this pump?

A: No we do not have a hydraulic motor suitable for this pump.

Can this be set up to use on a 3 point PTO?

A: We have no information regarding that application.

Will this fit the honda GX240 or the WT30X

A: As the specifications state: 'New, HYPRO 3" aluminum trash pump head. Simply add your own 6.5 HP engine with 3/4" keyed crankshaft.' From what information we can find that neither of those stated products appear to be compatible.

How long does the shaft have to be.

A: The standard shaft length for that horsepower appears to be approximately 2-7/16 on most models.

What engine rotation does this pump head require? Clockwise or Counterclockwise?

A: This pump head was designed to fit on a standard 6.5 HP gas engine with a 3/4" smooth keyed shaft that turned CCW as facing into the shaft.

Will this work on a 13hp engine as long as shaft is 3/4 smooth with keyway ?

A: If the engine also has the correct bolt pattern for mounting the pump body as well as the correct shaft diameter and length, it could work.

Will this work on a 9 hp vanguard with tapered shaft?

A: No, this will only work with a 3/4" smooth keyed shaft.

Are the given ratings for this pump at 3600 RPM? What is the max RPM for this pump?

A: The ratings are given at 3600 RPM. No other maximum RPM is given or implied in the manufacturer's literature.

Recently Viewed

You may also consider:

Email a Friend
3" Trash Pump Head with Strainer
Item Number: 2-1438
Price: $119.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3" Trash Pump Head with Strainer
Additional Comments:

Please wait...
Newsletter SignUp