4.33(110mm)x33.27(845mm)x2.76(70mm) DA Hydraulic Cylinder w/o PO Check

110mm (4.33") x 845mm (33.27") x 70mm (2.76") DA HYDRAULIC CYLINDER
New. Welded cylinder with thread-in gland cap. Rod end is threaded with thread-on tang. Transfer tube to manifold block measuring 100mm x 60mm x 34.5mm with two 13mm ports and five mounting holes tapped M8x1.25.

SPECIFICATIONS
Double Acting Bore x Stroke 110mm (4.33") x 845mm (33.27") Barrel Thickness 9mm (0.35") Pressure 3625 PSI max. (250 bar) Rod Dia. 70mm (2.76")	Ports Manifold, see above Retracted Length 1340mm (52.76") Shpg. 270 lbs.

END MOUNTINGS
Thread-On Tang Max Thickness 70mm (2.76") Pin Center to Tang End 60mm (2.36") Pin Hole 60mm (2.36")	Base End Tang  Max Thickness 71mm (2.79") Pin Center to Tang End 55mm (2.17") Pin Hole 50mm (1.97")